Where to get striping - ‘06 330

[grady33]

Dealer said Grady no longer makes the striping for my Grady and I’m wondering if there are any dealers who might have some extras lying around? Or where to order it?

 

[ocdansar]

I always use the 3-m stripe tape. I can’t remember the part number. Buy a big 2” roll of the blue and you can rip down the narrow out of it. The gold you can get the correct size. Any automotive paint supply store will carry it. Or you can get it online

 

[Capt Bill]

I always use the 3-m stripe tape. I can’t remember the part number. Buy a big 2” roll of the blue and you can rip down the narrow out of it. The gold you can get the correct size. Any automotive paint supply store will carry it. Or you can get it online

How do you rip it to a narrow width keeping the width consistent?

 

[mhinch]

I think I've got a small length of that.........How much are you needing?

 

[ocdansar]

You take a piece of the tape and wrap it around the stripe. You stick a razor blade in the piece wrapped around it at the width you want and have a helper pull the tape through and the blade slices it . I will try to post some pics demonstrating.

I owned a collision repair facility fir 38 years. We made most of our stripes this way.

 

[SeanC]

HullStripes.com

This is what I ordered for my 2006 seafarer. Looks the same as yours.
Multi-stripe roll

Stripe 1. Dark Blue 1 1/16”
Space 1. 1/16”
Stripe 2. Ultra Gold Metallic 1/8”
Space 2. 3/16”
Stripe 3. Dark Blue. 1/4”

Premium vinyl (3M and Avery)
$96 / 50ft roll

 

[grady33]

I think I've got a small length of that.........How much are you needing?

15 ft approx. I had some left from prior roll but just shy by a foot. Guess I could slice with yours if same width.

 

[ocdansar]

Mayb this will help alittle.

 

[Capt Bill]

You take a piece of the tape and wrap it around the stripe. You stick a razor blade in the piece wrapped around it at the width you want and have a helper pull the tape through and the blade slices it . I will try to post some pics demonstrating.

I owned a collision repair facility fir 38 years. We made most of our stripes this way.

Thanks.

 

[grady33]

Thanks.

Thank you!!! I’m not very good at the sticking on the boat process. Can it be ordered as a single roll to make it easier to apply?