- Joined
- Dec 1, 2018
- Messages
- 165
- Reaction score
- 40
- Points
- 28
- Age
- 48
- Model
- Express 330
I've just finished bending an webasto/istotherm freezer plate to install in the port under-seat cooler on my Grady 330. By the specs, it should easily be able to refrigerate that compartment, and possibly freeze the whole thing depending on how good the insulation really is.
I went with an air cooled unit and so far so good, I should be able to get it all installed in a couple of weekends.
However, the isotherm thermostat is a cheesy dial type, and it's not 100% clear to me if I can mount it just as well outside the box as inside.
I noticed the fancy digital controls on the newer 330s. Anyone know who makes that system, or at least who makes the digital thermostat? I don't see a particular reason I couldn't retrofit a different thermostat to this compressor setup.
I went with an air cooled unit and so far so good, I should be able to get it all installed in a couple of weekends.
However, the isotherm thermostat is a cheesy dial type, and it's not 100% clear to me if I can mount it just as well outside the box as inside.
I noticed the fancy digital controls on the newer 330s. Anyone know who makes that system, or at least who makes the digital thermostat? I don't see a particular reason I couldn't retrofit a different thermostat to this compressor setup.