Windshield on DC

Genobg

Member
Joined
Mar 2, 2020
Messages
12
Reaction score
0
Points
1
Model
Freedom 275
My gw 275 rode out Ian on a lift. Actually it turned out better than you might expect.

One of the remaining problems is that the windshield was “sprung” by the CAT 5 winds. So, now the center window folds back but its magnet knob does not match up to the magnet on the magnet welded onto the hardtop supports. Any suggestions?IMG_5285.jpegIMG_5256.jpeg
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,031
Reaction score
1,286
Points
113
I'd take it to a local marine T-Top manufacturer and see if they can straighten it out.
 

glacierbaze

Well-Known Member
Joined
Jul 6, 2012
Messages
2,488
Reaction score
644
Points
113
Age
75
Location
Chapel Hill and Pine Knoll Shores, NC
Model
Seafarer
Mark exactly where the adjustment teeth are aligned on the windshield support rod on the side where the window is hinged. Loosen it, and adjust it one notch in either direction, and see if the magnet lines up.
If it was actually the windshield which shifted, I would not think that the center window would align perfectly in the closed position.