Wipers ‘07 300 Marlin

Angler Management

Angler Management

GreatGrady Captain
Joined
Jun 15, 2014
Messages
302
Reaction score
25
Points
28
Location
Washington State
Model
Marlin
I’ve been replacing the blades on my wipers pretty well the past few years, but today I notice the wiper arm on starboard is bent a bit and showing corrosion. I’ve never liked these cheap wipers on such a nice boat, and have often wondered if anyone has upgraded the entire assembly with something nicer?
 
What type of arms and blades do you have? Are the blades snap on like a car or bolted on? The latter are more robust and the types used on commercial trucks. Same goes for the arms. The arms should last a long time but then again, if yours are original, they are 13 years old.
 
Following. It's on my to do list as well.
 
I was driving around this afternoon looking at the awesome wiper arms I have on my truck. Easily swappable high quality blades.... ahhhh!
 
seasick said:
What type of arms and blades do you have? Are the blades snap on like a car or bolted on? The latter are more robust and the types used on commercial trucks. Same goes for the arms. The arms should last a long time but then again, if yours are original, they are 13 years old.
Click to expand...

Blades need to be slipped on through the existing stainless arm. It’s held on to the wiper motor stud by an Allen screw. Not complicated, but I’m not sure there’s an easy swap.
 
I use Rainex on my windows. Water beads off so well, I removed the wipers all together.
 
You must log in or register to reply here.