Re: Would anyone be interested in having starboard work done
Still cranking out the starboard work if anyone is interested.
Still cranking out the starboard work if anyone is interested.
Would anyone be interested in having starboard work done?
- Thread starter jbrinch88
- Start date
Re: Would anyone be interested in having starboard work done
Storage compartment and filet knife/fishing gear holder I made for my 24' Offshore:
Storage compartment and filet knife/fishing gear holder I made for my 24' Offshore:
Re: Would anyone be interested in having starboard work done
Need a piece of starboard to mount two 7 inch gps/sonar on my seafarer inside electronic box,, to see what I need go to the next thread page 2 electronic tip electronic and modification, flush mount on seafarer,check TC Seafarer pics please give me a call or email 859-445-4646 or sbandrasik@aol.com thanks
Need a piece of starboard to mount two 7 inch gps/sonar on my seafarer inside electronic box,, to see what I need go to the next thread page 2 electronic tip electronic and modification, flush mount on seafarer,check TC Seafarer pics please give me a call or email 859-445-4646 or sbandrasik@aol.com thanks
Re: Would anyone be interested in having starboard work done
Yes I would like some star board work. Have done a bunch of it myself but love you photos. Cabin Doors look great in your photos. I have a 87 228 that was on land (on lift out of water) for 15 or 20 years. Cut most everything out and replaced, new electronics, hydraulics , rebuild 97 Yamaha 225 and 9.9 trolling motor, new gas tank, trim tabs.....really build a custom boat for ourselves.
Yes I would like some star board work. Have done a bunch of it myself but love you photos. Cabin Doors look great in your photos. I have a 87 228 that was on land (on lift out of water) for 15 or 20 years. Cut most everything out and replaced, new electronics, hydraulics , rebuild 97 Yamaha 225 and 9.9 trolling motor, new gas tank, trim tabs.....really build a custom boat for ourselves.
Re: Would anyone be interested in having starboard work done
Great Grady Members, I was recently offered a job at a different Marina that I couldn't pass up. Unfortunately I will no longer have the shop I used for all my starboard work. Hopefully in the future I will have my own place where I can do my service work and carpentry work. Cheers!
Jason
Great Grady Members, I was recently offered a job at a different Marina that I couldn't pass up. Unfortunately I will no longer have the shop I used for all my starboard work. Hopefully in the future I will have my own place where I can do my service work and carpentry work. Cheers!
Jason
Re: Would anyone be interested in having starboard work done
Ok we're back in action! If anyone is still interested in having some Starboard work done feel free to PM here, email, text, or call!
Jason
631-836-2312
jasonbrinch88@gmail.com
Ok we're back in action! If anyone is still interested in having some Starboard work done feel free to PM here, email, text, or call!
Jason
631-836-2312
jasonbrinch88@gmail.com
Re: Would anyone be interested in having starboard work done
Jason, perfect timing. I'll get those hatches out to you soon. What about that phony teak trim? You have a substitute for that?
Jason, perfect timing. I'll get those hatches out to you soon. What about that phony teak trim? You have a substitute for that?
Re: Would anyone be interested in having starboard work done
I make the trim out of the same material. There are a few pictures at the beginning of this thread. If you want text/email me and I will send you some more recent pictures I have.
Jason
I make the trim out of the same material. There are a few pictures at the beginning of this thread. If you want text/email me and I will send you some more recent pictures I have.
Jason
Re: Would anyone be interested in having starboard work done
I would be interested in having a bow pulpit as well as the two rear storage lids made for my 88 offshore 24.
can you pm me some pricing info please
Dan
I would be interested in having a bow pulpit as well as the two rear storage lids made for my 88 offshore 24.
can you pm me some pricing info please
Dan
Re: Would anyone be interested in having starboard work done
Jason does great work. He has made several pieces for both my Grady 282 and for a 17 ft Mako restoration project.
For the Grady had new toe rails made, the ends cracked on the originals at the screws. New ones look great and are as nice as original.
Will install when it gets a little warmer.
Oceanbean
2004 GW 282 w/ F225
Jason does great work. He has made several pieces for both my Grady 282 and for a 17 ft Mako restoration project.
For the Grady had new toe rails made, the ends cracked on the originals at the screws. New ones look great and are as nice as original.
Will install when it gets a little warmer.
Oceanbean
2004 GW 282 w/ F225
Re: Would anyone be interested in having starboard work done
Gradydaniele sent you a pm yesterday. Appreciate the kind words!
Gradydaniele sent you a pm yesterday. Appreciate the kind words!
Parthery
GreatGrady Captain
Re: Would anyone be interested in having starboard work done
Just a plug for Jason....he did work for me....good guy.....
Just a plug for Jason....he did work for me....good guy.....
Re: Would anyone be interested in having starboard work done
Jason,
Not sure which way is easier to reach you. I also just sent you an email. I have a 2002 Gulfstream and one of the toe rails is broken at one of the screws in the cockpit. I would like a new one made.
Jason,
Not sure which way is easier to reach you. I also just sent you an email. I have a 2002 Gulfstream and one of the toe rails is broken at one of the screws in the cockpit. I would like a new one made.
Re: Would anyone be interested in having starboard work done
2000 232 with anchor windlass, previous owner caught the anchor onlooker port side of pulpit damaging edge of pulpit. I can send you some pics, interested in replacing it. Can you give me an idea of the cost of a new pulpit?
Thanks
2000 232 with anchor windlass, previous owner caught the anchor onlooker port side of pulpit damaging edge of pulpit. I can send you some pics, interested in replacing it. Can you give me an idea of the cost of a new pulpit?
Thanks
Dand1
Active Member
- Joined
- Dec 10, 2010
- Messages
- 31
- Reaction score
- 2
- Points
- 8
- Model
- Express 305
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,030
- Reaction score
- 1,286
- Points
- 113
sent a PM (conversation) to you with a bit more detail. shoot me your email and I'll send pics and a sketch. Basically a divided box with a couple of drawers in it that is sandwiched between the fiberglass base and the companion chair.
Unbolt the companion chair, mount the bottom of the box as the chair mounts today. Mount the chair to the top of the box same way as the box mounts. Re-use existing hardware and front support and duplicate the hardware for the chair to top mount.
Unbolt the companion chair, mount the bottom of the box as the chair mounts today. Mount the chair to the top of the box same way as the box mounts. Re-use existing hardware and front support and duplicate the hardware for the chair to top mount.