DennisG01
GreatGrady Captain
- Joined
- Sep 1, 2013
- Messages
- 7,118
- Reaction score
- 1,312
- Points
- 113
- Location
- Allentown, PA & Friendship, ME
- Model
- Offshore
In case you did, please don't take offense to what I asked. Keep in mind that we only have what you wrote to go off of. From what was "written", it wasn't clear that you did and it's important to get some background info or at least make sure we're all on the same page.Thanks Captain - I do know the difference. My confusion is a result of an email exchange with Grady tech when I asked what the "white switch" is in the battery select box as it is not in materials nor is it labeled.
Their answer which totally bewildered me was: it is "the breaker for the shore power inlet harness." The boat has twin 30's. Thanks again.
So it's definitely not the shore power based on your manual and what would normally be expected. I assume you agree with that?
Unfortunately, we're not going to be of much helping you figure things out in this case. The only advice (short of pulling the panel) is just going to be to double check all accessories to see if it actually controls something. But pulling the panel MIGHT show it's no longer hooked up... or maybe you have an unhooked wire somewhere because the previous owner took whatever they installed with them when they sold the boat.
Last edited: