Search results

I run @ 3700 burning 19.7 GPH doing 24knts . 1/3 fuel , full water tank , and way too much gear . I think that it is exceptable . I do have a full tower so I drag more than others. My props are 17x15 1/4 bottom is real smooth after an extensive cleaning in the off season . 93 Marlin with...

Tie rod between the moters? Why dont you cross drill it and install a stainless cotter pin to hold it together or a clevis pin that would work also

It is either the water pump, t-stats (yes there are 2 of them) or your poppit valve aka pressure relief valve . Good news is all items can be changed while boat is in the water. Parts are not that expensive either. Find my post from last year on how to remove lower unit in water . Russ

very nice . What is with the stones under the tires?

congrads on the new ownership. The only un-happy person in your new deal will be your dentist. I had a Whaler, overrated

I got my chip from a place in Plymouth ma . I will look for contact info later in the week . I purchased mine in spring of 06. russ

I usually dangle it off of a high roof and let gravity do its thing . Usually take a couple of minutes .

Of coarse you can its your boat :D . I put a 90hp merc on a 15 whaler . That boat will make you a believer!! :o

Call teleflex tech support @ 1-604-270-6899. Leave a message and they will call you back with in a few hours . They are in Canada central time zone .

Jake, Just left message on your phone call me back if you want.

800 hrs is nothing . Run them till they blow up then make a decision on what to do. You might just want a new boat by then too.

This is not that hard. Just modify the existing harnes you have. Got to local hardware store but some aircraft cable and U-clamps. You allready have the rest of the equipment you need. It should not cost you any more than $20 to do this .

Tide- Do you think it affects the ride and roll a significant amount? Thanks- Capt. Armchair, I do not know it came with the boat. I also have never been out on any other Marlin to noice any differance. However I do notice that when on ancor ( alone with no other boats rafted up)...

I love mine . I dont have many pics of the mounts for it but I can take pics for you if you would want it .

Buy a Honda 2000 For about $930. And be done with it.

Is your tach working? I had similar problem a few years back with my 93' 225 yami and before the alarm went off I noticed the tach was not reading. They might be linked somehow . It was a bad ground in my case. No harm done that was the important part due to alarm.

I do agree that with the twin rams it is smooth . I already have a ty-bar installed so it really is not much $ to try it out . I was wondering if any one was running this type of set up . Thanks, Russ

Is anyone running a Marlin with only one steering cylinder and just a ty-bar conecting the port side engine? I want to tighten up my steering fro around the dock if I do this my turns hard over will be reduced from 7 to 3.5 according to Teleflex. I talked with Teleflex tech support today and...

the biggest one that you can fit in the space allowed

2 hrs south of you there is place in Dorchester Ma. called J. C Freeman . They are kind of tricky to get to, but they probally have it . They specialize in plastics.