Search results

My in-tank macerator sh*t the bed no pun intended. It just stopped working - no blown fuse, no symptions. I assume if it was jammed it would be blowing fuses but all looks good and there is power coming from the switch. Question I have regarding the install for anyone that has done this chore...

La cosa migliore è chiamare il servizio clienti di Grady White

Said another way - courtesy of Google Translator Good morning everyone. I am looking at a 2010 white Grady 330 express and would like to power it with a pair of Yamaha 425 '. If the boat were from 2022 there would be no problems ... but this engine was not planned for 2010 (max torque 350). Does...

Those brackets have a pretty strong grip that takes some prying to get the ladder loose and it will put quite a bit of pressure on the toggles and glass. I have a SF but that is one of the only things on the boat I have not replace. I always refrain from making any holes bigger wherever...

Mine is the same - have to go up to the bow and give it a push

Just an FYI - the seacock may not have a handle on. Many folks remove to avoid and accidental discharge and or a violation.

I had the same problem in my Sailfish - the wooden shelf that is part of the decorative shroud around the window was rotten from the leaks - after replacing the wood and reinstalling I started experimenting with the locking mechanism on the window. I had always just latched them until they were...

It would be but because it is 3 inches shorter and 2 inches narrower it would interfere with the slide operation

I might just try a time tested solution with couple of wraps of duct tape around the pedestal - if that does not work maybe try the hammer :)

Thanks, I did see this and it is one that does not attach to a pedestal - the search goes on - This particular assembly does not have the cup bushing which would solve the issue but there is no cup that fits in the pedestal bracket and if there was one it would be tioo tight to get the chair...

My Pomanette ladder back helm chair slides/spider assembly are getting worn out and won't tighten down to prevent the chair from spinning anymore. The assembly that came on the chair is 16 x 6.75" . The My original slides were made by Garelick - no luck searching Garelick, Springfield and...

I had an eel get stuck in my line between the seacock and filter. It can be a treasure hunt to find the blockage - good luck

I saw several new boat ex engines at the dealership this past spring when I was prepping mine for launch. Thought it was strange, Never thought of the logistical issues of storing all the boat awaiting engines at the Grady factory.

That would not bother me - I had a few this week I took care of with a gel coat repair kit. I can't tell from the pic but it looks like they are inside the boat?

I have a 04 Sailfish and the OEM frig was battery only. If your on shore power the batteries stay charged by the charger. If not on shore power or under power you can drain the battery. Your can turn the frig of with the knob inside the frig toward he back top right. I replace my frig 3 years...

I have the same chair and it never had a busing on it. I have tried to find the correct one for years with no luck. They have either been too big or too small.

Make sure your boss gets out on that boat for a cruise or a fishing trip! Congratulations!

Looks great and a great Father's Day gift

Seafarer was my first GW and I really like it for fishing, cruising. If you are an ocean boater, I would avoid and of the hulls that are pre SeaV2 hulls. The ride difference in choppy seas is very much improved with SeaV2 hull. Not sure the year they converted the Seafarers but GW could let you...

I have twins in a slip and I uea a y valve to flush both engines at the same time. They flush in the tilt up position. When the flush is near completion, I lower the starboard engine to gain the access to the port engine. Shut the port engine flush off and disconnect the flush hose. The...