Search results

I agree with Dennis.......I had a 250 Yammi on a 1985 Offshore and it would do 40mph....I rarely ever ran it WOT but it would do it. Now I have a 225 E Tec on a 1982 version and it does 37-38 mph. Some people would say it is underpowered but I never felt that way...even with a crew on board...

I would check those thru-hulls again.

https://gradywhite.blob.core.windows.net/media/22211/1999-226_228.pdf That is a link to your owners manual....if it doesn't work GOOGLE Grady white owners manuals....find your year and model and download it. Your main tank is 92 gal.....aux is 56 If 15 inches = 92 gal.....then every inch of...

Congrats! Enjoy and best of luck.

Awesome!! Enjoy.....I love Edisto BTW.

Duh! No I didn't .....because I am not too bright. ;) Not sure if that would work though but certainly worth a shot.

I didn't read all posts but are you getting your fuel at the same place all the time? Maybe it is their problem and not yours.

Cap is a press on fit....I have not had the window fly open. My boat is an '82.....it had 40 years of UV working on it...AND.....I think I broke it myself by using it incorrectly in the firsyt place. Just FYI......the screw pattern on the base was not the same as on my Offshore....I could only...

For me it was the inside handle....the plastic got brittle and broke when I torqued it.

https://www.amazon.com/Sea-Dog-324380-1-Side-Adjuster/dp/B000ZFRGPC/ref=sr_1_4?dchild=1&keywords=seadog+side+vent&qid=1621604285&s=automotive&sr=1-4 Worked for me...I just installed it yesterday.

As Dbiscayne said there is a tube connecting the front bilge with the rear but if your Gulfstream is anything like my Offshore it may sit bow-down at rest. I either have to sit on my outboard at the dock or run the boat at less than planing speed to get the front bilge to drain rearward. You can...

On and Off cleans the scumline on my boat with ease.....maybe it will work for hydraulic fluid...? https://www.crcindustries.com/products/on-off-hull-bottom-cleaner-1-gal-mk20128.html

When I changed my lines I drilled 2 small holes in the ends of each line and wired them tightly together....end to end....with bailing wire. Then one pass of duct tape over the joint....sprayed some WD40 on the old lines. Worked for me. Good luck!

I use my 19 year old nephew for those kinds of things on my Grady. He works for sandwiches but MAN! That kid can eat!

Man.....that is NICE!

Congrats and good luck!

:) I have tried 3 different caps and 2 different fill plates.....the threads on the caps range from 1.25 to 1.5 in...I need 1.75 and the top escutcheons on the new fill plates are all too small....I may have to try the starboard thing Dennis mentions. That is the same thing I had to do when I...

Tried Perko Seasick....the largest I found is 1.5 in threads. I do know the hose size is 1.5 in as I just finished replacing it and everything else associated with the tank.

That probably would work Glacierbaze but my model did not have a fresh water tank. I would gladly go generic if I could find the right size.....don't really care what it looks like as long as I don't get any water in the tank.

LOL....I did Halfhitch.....aside from being about 5x the price it should be, I am pretty sure it won't fit my old Offshore. The escutcheon is considerable larger than anything else I have found.