Search results

Do the controls have a display? If so it should flash an error code before popping a breaker. check manual for trouble shooting, should be available on line if u don't have it. There are plenty of threads about replacements, search on replacement AC. On my old 2004? Boat the AC units (3 of...

The only differences between towing and running the boat on water are speed and turbulence. 60+ mph can be reached with boat on water in strong headwinds etc. so there should not be a major issue, some yes but not that much. Turbulence on the other hand is a major factor. Behind the car / truck...

Related but not quite the same. I had a wellcraft where it turned out one outlet in the cabin had been reverse wired from the factory. That is after the panel so no polarity issue and it did not happen over night. In you case I would trace each cable from the back of the boat and see where it...

Scandvik I think is a likely source. https://www.scandvik.com/index.cfm

I had same problem and it turned out the faucet worked like a joystick, up and down and side to side. Otherwise are you suse you turned the fresh water pump on at the electrical panel. Switch on dash will not work unless panel is turned on. If you have a shower at back of boat try if that one...

On the LED light flip it as it may be that +/- are the wrong way for it to work as some are just one way working not like old incandescent bulbs.

Sounds like you have it worked out with your crew/friends. the way the heads used to be was to pump it right out no tanks as intermediaries but that's not allowed anymore and on the lakes they are really picky about disabling all macerated pump out systems and only allow marina pump out...

Wow, normally the ocean dump switch is behind a key, so I have to turn the key to on position and of course open the valve which otherwise should be closed unless over 3 miles offshore. What a mess that would make but at least it worked so they serviced that area for you as well. H

As said it is designed for that but don't let stuff stay in tank too long and dry out. You can theoretically at least attach a hose with a connector to the outside of boat when in a rack and flush with fresh but it is a mess to keep the hose feeding the pump at low pressure, u cannot force with.

I believe I had the same experience of getting the manual but also numerous contacts by local dealer. No big deal and I believe the old manuals were better as the new ones are more generic and less model specific. just call them and ask for one. H

The waste hoses may not leak fluid but vapors when they get old. So a color test may not reveal a bad hose. If that id the odor and it is easy!!!! To replace hoses just do it. Now assuming the boat is over 15 years old. Otherwise just us those left over Covid ..... not really. h

I guess it is a Jabsco manual pump then. And as others have said u need the seawater for the pump to work. the Electric vacu flush ones (it looked like it was an option for the boat) work differently, they get pressurized water into the bowl by lifting foot pedal, and then after u r done you...

If the motor revs that high the prop should push you faster. If the motor revs that high doesn't mean the prop is turning. You said they verified that the hub was not slipping. Something is fishy. Can you Detect cavitation? Meaning prop is not gripping as the water is "boiling" around it. I...

Emergency plan; lifejacket and overboard:) I have a friend with a big CC and he dissed the head. Anybody onboard use a bucket when needed, confirmed before boarding...Big fishermen.... and vacationers in the Bahamas. h

Are you sure the vacu-flush uses salt water? Mine uses fresh water from the tank and the fresh water pump has to be on to feed it with water? Do you have a macerator that allows for emptying out at sea? Or is only emptied through a onshore vacuum system through a deck access cap? In any case use...

At what speed is it not tracking? Low or higher speeds? If it at higher speeds it seems something is moving the motors, ie not holding them in place. Any loose mechanical connections ? Have you tried to use the trim tabs to stable it? On one engine boats it is a real headache at low speeds and...

I planned on mounting TV antenna (not factory optioned) on port side of hardtop where I currently have a WiFi antenna (not in use) . Looked at how to get cabling down to Helm area where I have TV mount just above cabin (not inside). Ended up scrapping idea and have a "mobile" antenna now sitting...

I planned on mounting TV antenna (not factory optioned) on port side of hardtop where I currently have a WiFi antenna (not in use) . Looked at how to get cabling down to Helm area where I have TV mount just above cabin (not inside). Ended up scrapping idea and have a "mobile" antenna now sitting...

Ok, I don't have an overhead box at all, all is in or behind the dashboard. And of course the chases are jam packed. A 335 so some goes into or through cabin and head. I'll work it out one day but for now TV antenna is "movable" sitting on cushion on top when in use. See other post as well. H

Looks good. How did you snake the wiring down? That seems like the hardest thing and I gave up on installing TV antenna for that reason. H