Search results

Did this project on my 265 and wanted to share on my new to me 330, thought might help others at tackling on there own. Pulled engines with automotive engine hoist and mounted them on automotive engine stands which worked well. 2 person job for sure. The original bang cap was aluminum and...

the Throttle position sensor voltage is critical, as well the o2 sensor housing needs regular cleaning, depending on oil type used they can build up enough carbon that the o2 sensor becomes blocked and doesn’t read properly. you really need the yds software to interface the ecm to read sensor...

If You are buying from the local pump vs a marina, I would personally avoid the 93. Here’s why I own a motorcycle shop any every spring my customers complain about intermittent stalling they all have 93 in common. My theory is the average person doesn’t pay the extra for super, so it sits...

I had a 33 express hauled from Alabama coast to Falmouth ma. Highly recommend G and G of south Florida (786) 306-4457. They came highly recommended by friend that owns marina in old saybrook ct. They were timely, sent me pics of pickup, text me status updates of location. Meet them at marina...

Facebook marketplace has one for sale in Mashpee ma. Believe 2014 366 canyon

My 2001 I installed lowrance ad simrad 12” into kingstarboard. No cutting of glass required, measurements must be precise if you don’t want to cut fiberglas, looks factory to me

To answer your question the accessory fuse panel is located under your helm electronics box. Power the panel all the way up there is a 6” round access port on left corner closest to helm side. Sometimes it easier to pull pin on ram and have some one lift box up further. The location is not...

Thx great info, I would have not figured it out otherwise. Lot of new things for me to learn on this boat. My 265 did not have so many systems.

Great I was hoping that was the case. One of the post has cracked the fiberglass, probably from people leaning or falling on it. Want to remove an repair.

New to me 2007 330 express, has thumb screw at rear most point of windshield. It appears to be tied into curved seat backs. question is if I remove screw does that whole seat slide up off mounts? Any ideas? thx

I had a 2001 265 express as well and it has a vent on starboard side, you should have one unless it’s been removed and glassed over? Tank needs to vent

i think my repower would be Suzuki’s this time, they have a new 300 dual prop, for better bite.

The early 350’s have casting flaw that creates a pocket in head that is hard to bleed out air and creates a hot spot, the same location also can trap Water and freeze, they are not fully self draining and require these engines especially to be filled with antifreeze when winterizing in colder...

I just sold my 2001 with 400 hrs for 45k buyer picked up sunday

looks clean, what did you use for paint

After seeing this done last season , I did mine makes it seem like a much newer boat and so much nicer than lookin into the cabinet.