35lb Delta plow anchor on a 2009 33 Grady express

Sundowner

Member
Joined
Jul 3, 2024
Messages
8
Reaction score
0
Points
1
Age
67
Model
Express 330
I have a 2009 Grady 33 Express and I recently lost my 22lb Delta anchor in the Bahamas.I replaced it with a 35lb Delta which fits the bow pulpit very well.I am just concerned that it may be overkill for the boat .I am checking to see if any other owners of the same boat have upgraded to a 35lb to make sure that it doesn’t put too much strain on the bow pulpit and windlass.Appreciate your comments.
 

loubeer

GreatGrady Captain
Joined
Sep 6, 2017
Messages
204
Reaction score
75
Points
28
Location
Newport Beach, CA
Model
Express 330
I've had a 22 lb. Delta on my 2003 Express on the West Coast. I have 50 ft of chain and 300 ft of line. Never had an issue, but you may have more extreme conditions. Can't answer the question on stress to your other components.
 

drbatts

Well-Known Member
Joined
Nov 30, 2008
Messages
887
Reaction score
190
Points
43
Location
CT
Model
Express 305
If I had a 33 express I would get a 35 delta. Its a big boat and you're not pulling the anchor, the windless is.
 
  • Like
Reactions: Fixit

Fixit

Well-Known Member
Joined
Jun 26, 2022
Messages
87
Reaction score
29
Points
18
Age
43
Model
Islander
I had a 22lb delta on my 20' boat. 35 seems like a more appropriate size. better holding power for a better nights sleep is always a good thing IMO
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,189
Reaction score
1,341
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
I had a 22lb delta on my 20' boat. 35 seems like a more appropriate size. better holding power for a better nights sleep is always a good thing IMO
Actually, a 22lb Delta is way overkill for a 20' boat and still WELL within it's limits for only a 30-ish foot boat. But it can never hurt to bigger :)
 

pursuit2

Member
Joined
Jul 6, 2024
Messages
5
Reaction score
1
Points
3
Age
57
Model
Fisherman 222
A few things: check the ratings on your windlass to make sure it will support that anchor, if not you will blow the fuse and usually at the worst possible time. Also, holding power has a lot to do with the length of chain you use, and amount of rode you set out, this keeps the angle of the anchor down and buried properly.

On Lewmar's website, you are in the range of boat size for the 35lb anchor.

 
  • Like
Reactions: mykidzmomnow