Hello wondering where I can find these window latches for voyager

[Danistro]

 

[Halfhitch]

Have you looked here yet?

https://shop.southco.com/en_us/

 

[Danistro]

Have you looked here yet?

https://shop.southco.com/en_us/

Yes I can’t seem to find it anywhere

 

[Danistro]

Have you looked here yet?

https://shop.southco.com/en_us/

Sites-WestMarine-Site

West Marine

www.westmarine.com

This is the closest thing I found but I’m not sure if it’ll work

 

[Halfhitch]

Sites-WestMarine-Site

West Marine

www.westmarine.com

This is the closest thing I found but I’m not sure if it’ll work

Chances are you will have to use a different latch and just figure out how to mount it so it will do the job. That one you showed may work, since you can grind down the tongue of the lever or build it up so it fits tight in the existing wall bracket. For that matter it may be easier to adjust the new wall piece for offset to get the proper squeeze on the window. Show us a picture when you get it McGuivered.

 

[Danistro]

Chances are you will have to use a different latch and just figure out how to mount it so it will do the job. That one you showed may work, since you can grind down the tongue of the lever or build it up so it fits tight in the existing wall bracket. For that matter it may be easier to adjust the new wall piece for offset to get the proper squeeze on the window. Show us a picture when you get it McGuivered.

Will do, let’s see how it turns out

 

[Halfhitch]

One other thought. With a heat gun, you could warm the tongue and bend it till it has the correct offset.

 

[Danistro]

One other thought. With a heat gun, you could warm the tongue and bend it till it has the correct offset.

Yes that’s a good idea I ordered it so will posts pics when I install it

 

[Mustang65fbk]

If you zoom in on the picture you'll see a small sticker that says "Moonlight CE", of which if you do a Google search on them, the below company pops up and has a spreadsheet for parts and so forth and yours looks to be similar to the one on page 6. I'd try giving them a call and see if they have something that'll be an exact fit, or something close enough to work.

https://ibsplexiglass.com/wp-content/uploads/moonlight-hatch-and-portlight-pdf.pdf

 

[Mustang65fbk]

And/or this site looks to have the spare knobs available, dependent upon which model you've got. I'd give them a call though if your current solution isn't working for ya.

Portlights Spare Parts - BSI Rigging

bsi-rigging.com

 

[Danistro]

And/or this site looks to have the spare knobs available, dependent upon which model you've got. I'd give them a call though if your current solution isn't working for ya.

Portlights Spare Parts - BSI Rigging

bsi-rigging.com

This looks like it is it thank you

 

[Mustang65fbk]

This looks like it is it thank you

Of course! Good luck

 

[Danistro]

Of course! Good luck

hey just forgot to thank you for linking that for me they're a little expensive for what it is but i ordered them just haveto put em on thanks again it was 120 for the latch w shipping

 

[Mustang65fbk]

hey just forgot to thank you for linking that for me they're a little expensive for what it is but i ordered them just haveto put em on thanks again it was 120 for the latch w shipping

No worries... and $120? That seems rather absurd.

 

[Danistro]

Yea that’s exactly what I was thinking even saw it in another website 99 each lol

 

[Mustang65fbk]

Yea that’s exactly what I was thinking even saw it in another website 99 each lol

Dang... that's crazy. They're $49 a piece on this website. Which is quite ridiculous for plastic.

Moonlight Portlight 91 Series Latches - AB Marine

ab-marine.com