- Joined
- Oct 12, 2017
- Messages
- 4,524
- Reaction score
- 1,620
- Points
- 113
- Location
- Manasquan Inlet NJ
- Website
- www.youtube.com
- Model
- Express 265
Here's a rough idea of what I'm trying to do.
I want to be able to switch on batteries without opening hatches and removing bins on both sides of the boat.
Both starting batteries on port side and doubled house batteries on stbd side.
Utilizing existing switches for emergency combining. There are already wires from terminal 1 to 1 and terminal 2 to 2. This gives me a perfect connect from side to side.
I am putting BlueSeas miniBattery switches mounted under the gunnel (above Shore power inlet on Stbd side and washdown fitting on port side) thru a circular cutout. Wiring will be inside, knobs outside.
In the diagram connected wires are shown with a dot. Otherwise there is no connection.
I want to be able to switch on batteries without opening hatches and removing bins on both sides of the boat.
Both starting batteries on port side and doubled house batteries on stbd side.
Utilizing existing switches for emergency combining. There are already wires from terminal 1 to 1 and terminal 2 to 2. This gives me a perfect connect from side to side.
I am putting BlueSeas miniBattery switches mounted under the gunnel (above Shore power inlet on Stbd side and washdown fitting on port side) thru a circular cutout. Wiring will be inside, knobs outside.
In the diagram connected wires are shown with a dot. Otherwise there is no connection.