Replacement recessed gunwale fresh water faucet? Not shower head.

[Mirage_Man]

I’ve done my best searching the forum and the internet but I can’t find a replacement for my 95 Tournament 192 fresh water faucet. The plastic recessed box is dry rotted and brittle and already has a hole in it. I’d like to replace it. Anyone know where I might find one?

 

[Walleyze]

I need one too. Hopefully, someone will chim in.

 

[Mirage_Man]

Just got off the phone with Grady. They haven’t been made for years and have no replacements nor do they know where a NOS might be acquired.

 

[seasick]

You can try Boat Outfitters who can custom make an enclosure. You would have to select a faucet to fit the insert. Since the insert box will be pretty much generic, you have the other option of making an insert and framr out of Starboard and fitting a new faucet into it. The color of the new box probably won't match your existing color.
If all you want is a pull out faucet with only cold water, you could install one of those either on top of the gunnel or on the side. See what plumbing fixtures meet your needs and go from there.

 

[Mirage_Man]

You can try Boat Outfitters who can custom make an enclosure. You would have to select a faucet to fit the insert. Since the insert box will be pretty much generic, you have the other option of making an insert and framr out of Starboard and fitting a new faucet into it. The color of the new box probably won't match your existing color.
If all you want is a pull out faucet with only cold water, you could install one of those either on top of the gunnel or on the side. See what plumbing fixtures meet your needs and go from there.

Thanks for the info. The boat already has a pull out shower hose on the top of the gunwale near the transom. I’m not really sure what this one was meant for. Maybe to wash your hands or something? Idk.

I may just remove it entirely and cover it with a piece of 1/4” starboard.

 

[Late Again Grady]

I got my replacement from:

Fin-Addict Marine
402 W. Martin St.
Benson, NC 27504
919-989-6813

Hopefully, they still make them.

 

[Fishtales]

gonna have to go custom with that. Could do something on the cheap with thin starboard like material and some good cutting, routing and assembly. If you do, I'd angle the floot 45 deg and put a hand held shower head like GW uses in boats today vs the faucet.

 

[Mirage_Man]

gonna have to go custom with that. Could do something on the cheap with thin starboard like material and some good cutting, routing and assembly. If you do, I'd angle the floot 45 deg and put a hand held shower head like GW uses in boats today vs the faucet.

Already have a Scandvik shower in the gunwale near the transom.