trim tabs anodes

keba1973

Member
Joined
Sep 19, 2021
Messages
8
Reaction score
0
Points
1
Age
73
Model
Tournament 205
Where do you buy your trim tabs anodes?
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
They are available in most marine supply stores as well as online sites. There are companies that see only anodes like Zink For Boats.
You need to know what size you need. Bigger is not necessarily better.

I do wonder what percentage of folks on this site who have trim tabs, have sacrificial anodes. I don't. My baot sits in salt water from April thru approx November
 

Hookup1

GreatGrady Captain
Joined
Oct 16, 2007
Messages
3,035
Reaction score
856
Points
113
Age
70
Location
Cape May, NJ
Model
Islander
I have the little "candy bar" zincs on my Bennett trim tabs. They get eaten up pretty good even though the boat is only in the water for a few month.

Have the standard Yamaha zincs too.
 

Rustygaff

Well-Known Member
Joined
May 6, 2015
Messages
252
Reaction score
55
Points
28
Location
Misquamicut, RI & Melrose, CT.
Model
Freedom 255
On the advice of the late "Tabman" from Bennett, I install an aluminum disk type anode on top of my tabs. The anodes come in pairs so I only use 1/2 of it so not to interfere with the tab action by mounting anything on the bottom. I boat in salt but the boat is slipped in brackish water. At the end of the season I do find the anodes eaten up a bit.
 

max366

GreatGrady Captain
Joined
Oct 6, 2010
Messages
300
Reaction score
32
Points
28
Location
East Falmouth
Model
Express 265
I replaced the handlebar anodes on both motors and decided to try aluminum - I've always used zinc. When I hauled the boat, the aluminum anodes were covered in barnacles! Never had that issue with zinc since it's a biocide. Something to consider...