Search results

Sounds Like I need to look into the ground since everything is working fine. Just not lighting up

To all, The indicator lights on the Main AC panel side only are not lighting up on my 2002 330 Express. All switches work fine but no indicator lights work. The DC panel side works fine. Is there a connection up behind the panel that is just for that and may have come loose or has anyone had...

Hey Block, I replaced my TV with a standard LCDTV and put it on a wall mount bracket that is a swing arm. It is attached to the left side so it can swing out. It fits pretty close to the opening and the tension on the arm is tightened enough so it sits right in place. The nice thing I found was...

Not to highjack the thread but in my 330 I noticed my vacume will continue to pump and never stop after flushing due to an air leak somewhere. any suggestions where to look or get at the area? Where do I access the vent? or the gasket you guys are talking about?

Don't think it is a fouling prop since it seems to push the boat as well and the boat will turn to Port as the starboard engine jumps up in RPMS.

Ok, Any other suggestions? The ground wire is actually fine. Anyone else have this problem in the past with their Yamaha's?

Reading my mind. I have the same boat and same year, and have the same problem. I have debated about sanding it down to a smooth edge again or researching a beige colored plastic molding edge. I am curious for any ideas.

Tom Lisa, Thanks for pointing that out. My ground wire has separated. I am hoping to check it out this weekend. Would have never thought. Thank you

Yes, all paid up and then POOF! All gone. Wasted allot of money

only about 15 hours since all filters and separators have been changed.

I noticed when running the boat this weekend that a couple times the Starboard engine would jump up in RPMS, about 600 RPM's up and then back down. It would pick up speed as it increases. Any ideas? Yamaha 2011 F250's.

I had both engines done. they were 2002 F225's. I had Garden State Marina in Point Pleasant fix mine. $6000 for both fixes. Ironic part was the boat was still waiting for another part and washed away with Sandy. Talk about wasting money! Either way Garden State Marina in Point Pleasant is well...

DJohnson, funny you say that about the Zinc. My Starboard Zinc below the cavitation plate when I came in was loose the first time this happened to me so we tightened it. Went out the second time and the same thing happened again. When I returned to the dock, I noticed that now the zinc has...

Megabytes, Much appreciated info. Your description is right on. Thank you.

I just purchased a 2002 330 express and have noticed that the boat is very sensitive to the touch of the trim tabs. /my prior boat was a Proline 33 Walk and was not as sensitive and I guess I need to get used to the handling. While going out this weekend the boat got caught up in a small swell...

Yes, 30 degrees is what I put in.

I just got my 330 express which was purchased used. I noticed the stiffness of the steering when turning the wheel and the slow responsiveness of the engines as compared to my prior 33 Proline. I was told to check the Helm of the Sea Star unit and look to see if it is a 1.7 cu. inch or a 2.4 cu...

Can anyone elaborate if they have done this before? Also, Want to confirm that the floor is definitely wood and not a manufactured wood.

Just asking the obvious, Is the Seacock lever open to draw the water?

On/OFF. Best product, hands down. Just need to reapply wax after use but it gets all stains off but rust, and for rust I use a product called WINK.