Search results

Thanks all. I think I have it mounted properly now. Now the question is to get the best readings, should it be level with waterline at rest , or slightly up so that when at plane it level with bottom?

The best riding hulls have a 3.1 ratio. Length / beam. Example is 25’ length divided by 8’ beam. 28’ length divided by 8.5’ beam.

On my 2001 226, I am having problems with heavy water spray from the transducer to the motor, causing salt water to get inside the cowling and leaving residual. Mechanic check cowling etc for gaskets and seals to be sure they were not the issue. Took the boat out for a ride with mechanic, and...

No. Not for the seafarer. For a 25

Thanks for your response. This is helpful as the motor is a 2013

Can you guys give opinions of the Yamaha 350 four stroke. Reliability, performance etc

I go through this every year. I store the trailer through the summer only to find the wheels all locked up on the disc brakes. I take the time to flush the wheels and brakes thoroughly. What am I missing? Is there something I should be doing to prevent this?

I just did mine also on my 2001. The match as you said, is exact. Easy to work with and no more concerns.

I only have two speakers in the boat( port and starboard in front of seats. I did like to add speaker to the rear of the boat or to the hard top. What kind of preferences do you have ?

No need to purchase. Gradywhite.com. It brings you right to manuals. Just plug in the year and model. I printed mine from there

Anyone have pics of where they placed their Garmin transducer on See Vee 2 hull I’m losing function at 18 mph. I thought I followed all instructions properly.

2001

This may not be exact, but pretty darn close. I just measured today. 25 1/4 x 15 3/8. Again, may not be exact.

Love my budge

Budge has terrific covers for under $400.00. I got the 1200 denier and it works great

So.... I found this today. Ugh.... I got shafted by my shrink wrap guy again. He kept promising and promising but never showed. Last week I finally ordered from Budge and got the cover today. Went outside and found this. I’m guessing it was cause don’t by ice intrusion. What’s the correct fix...

I’m looking at a 258 with twin 04 F150’s. I’m hearing conflicting reports regarding the exhaust corrosion. Some say only on the F225’s, and some say all Yamaha 4 strokes between 2000 and 2006. Motors run great, but have not had the exhaust replaced. Love to hear your opinions