Search results

Have a ‘06 330 and need to replace the 1” bronze ball valve on my waste holding tank pump out. Grady recommends replacing it with what is there already (pic #1). However, I’m considering replacing it with Groco IBVF/C83600 bronze (leaded red brass/85-5-5-5) flanged adaptor w/backing block...

My 2006 330 fully loaded cruises at 24-26 knots at 4800 RPM burning about 1.1 gal/per mile. I have 2006 F250s with 1,500 hours. Just performed the midsection replacement in my port motor and had to have a little section of block (between exhaust port and water jacket) TIG welded. She’s back...

I ended up having a glass guy fix the large opening from the old Furuno auto pilot. I actually did most of it and left the final gellcoating to the professional. I was able to get a cutout from another boat and epoxied it just a tiny bit lower than surrounding area. Gellcoat went on top and...

I run mine nearly every time I am offshore (May - October). Has worked great and probably nearing 1,000 hours. Engines have 1,500. I have not adjusted the valves but it seems to run fine. Anyone who has done this, is it an easy process. Looks simplistic in the manual but I’ve never done...

Following. I’d like to do the same!

What was the damage to the boat and are you positive they didn’t go under water? I wouldn’t touch an engine that did although I have heard folks who pickled them and got ‘em working.

I didn’t but I have the parts, extra hub and cord. May take another crack at this over the winter.

How easy is it to remove the injectors? I have 06 F250s

I’m also interested. I have a 06 330.

Don’t like to see that!

I did the same and added 2 group 31’s on outside but had to change battery trays. Did you notice any slight list to port in aft? That side of boat sits a little lower in the water.

Thanks for the replies and information. I’ll reach out.

Unfortunately the older 330s like my 06 can’t take advantage of the new 425s. I still cruise 28-31 burning 29 GPH heading offshore on a good day! What you burning on the 425’s at cruise?

Funny you post this, I have a 330 and have kept it at a marina for years but I have a lot nearby and plan to put it there. Gonna need stands and railroad ties also! Mine usually had blocks under bottom back and behind bow thruster and then 4 or 6 stands. Not even sure where you buy them!

The striping for my 06 Grady 330 Express is no longer available from Grady. Does anyone know of a place that might have it? I need to replace a 10 Ft area on starboard side. The rest of the striping is in real good condition so don’t want to remove it. I’m also looking to replace the side...

My ‘06 330 is in the water from April thru October then on the hard and shrinkwraped for winter! It has a pair of F250s and we cruise (fully loaded) at 4800 RPMs at 28-30 burning roughly 29-30 GPH. Just got back from a 36 hour offshore tournament and we burned 288 gallons trolling and drifting...

How easy of a job is it to change the gear leg?

Well, it turns out it’s a 250 amp fuse.

Hi - Have a 2006 330 Express and blew the large fuse by the battery. It’s one of those ANL type fuse but I can’t really make out the size because it disintegrated. .Anyone know what size it is?

Interested. What year?