Search results

Have stored my boat for 6 months with full fuel tank over 25 years and never a problem. Just use a good amount of stabil! I do not use ethanol!

I leave my gas fuel tanks full over the winter and treat them with stabil. Should I do the same with generator diesel tank? I have in the past but wanted to double check. I could easily drain the tank and leave it dry.

Who has had a cover made for 330 Express? Any pics?

I put a new Fusion 6 channel amp behind fridge in my 330 Express. Works great!

Have owned 3 boats in 30 years (last 2 Grady’s) and always store full (no -ethanol). I add fuel stabil before last fill up which I did this past Saturday. The “special” Biden price was $4.43 per gallon and I needed 168 gallons. Ouch!

I have an Express 330 and fill both tanks and add stabil before fill up. Been doing that for more than 20 years with this boat and my 272 and never had a problem. I only use non-ethanol fuel!

My 06 330 Express has one in that exact area.

Starting to do more deep dropping for swords and will be using electric reel. Needed to add a 12 volt plug but I didn’t want to put any additional holes in the boat. So I replaced the old TV/phone connection in aft with a stainless receptacle. See photos. Just need to put a label on it...

Purchased a quart of gelcoat from Grady dealer. Had it already made but you can also order it online from Spectrum Color. Just tell them what boat model and year. Sprayer used was a simple disposable Prevail 9 oz sprayer from Home Depot. Need to fill in any holes and gaps and sand well...

Replaced Furuno auto-pilot in my 06 330 Express with Garmin which left a large hole in the dash. Here’s the before and after pics. Found a cutout from another Grady and cut it to size and epoxied it just below the surface. Then gellcoated it over with final coat sprayed on using disposable...

Has anyone done this or seen it done? I’m wondering if there is a way to mount a curved LED bar under pulpit? There seems to be room there! Need it to just spot crab pots when navigating the bay.

No idea but that stuff works great on mold and doesn’t bleach out colors. I use in my shower too!

Thanks! Was wondering if i could swap out for a plug for something else

This connection is on the back of my 06 330 above power connection.

I have a Grady 330 with 4 AGMs. I replaced 2 last year and went with West Marine Group 31 dual purpose AGM. They were. tad bigger than the AGM 27s remaining so i had to get bigger trays. Anyhow, they are on port stern side and the 31s are on outside and now i have a very slight list. Those...

Just use the grady caulk or any marine use caulk. I like the grady stuff which matches gellcoat.

I would think a local Grady dealer would have them. i had a bunch of extras from the previous owner.

Bigeye caught (Aug 28-29) overnight aboard private boat Reel Escape out of Ocean City, MD.

Buy this and spray it on any mold or spots you see through outlet the season. i have 06 boat and visions and gunnel pads look new. i spray caulk and where lever i see mold. works wonders and no bleach. Should not use bleach on a boat if you want your metal to stay bright!

I asked about that July 2020 and got this message back. Mr. Stevens, Thank you for contacting us with your email. The TPI2000 system has been discontinued for some time now, so your best choice will be to retrofit one of the following Classic Hydraulic trim tab indicator controls on yourvessel...