Search results

Jeff, I was the proud owner of a 77 kingfish for twenty years.When I had the boat awlgripped in 99 I made stencils of the logo before I removed it.The decals came out perfect with a little editing at the sign shop.The hooks and font all original.Ironically,they never made it onto the boat !After...

Bob, Just throwing it out there,Formica ! On my 77 the bulkheads were covered with viynl,and the results over time were a disaster.Water eventually did its thing within the plywood.So,I removed both panels and traced the pattern onto 3/4" marine plywood.After cutting,I glued up a formica with a...

Gary, The side bolsters and the small piece on the transom door is screwed down.On the bottom edge there are grommets.Take a phillips head and search around and you will find screws.After you remove screws pop the bolsters up off of the mounting clips.I would think the piece that wraps around...

Mike, Sounds to me like you talked to John at Voyager !I was in a similar situation with the same boat two years ago.He hooked me up with the Airmar low profile tilted element through hull(600W 20').I mounted it outboard of the transducer pocket,halfway between the lifting strake and...

Paul, The model number from Lee's is :AP3519XS.I found a good deal on Ebay last summer. Chris

Hello, I bought a set of 19'Lee's extra strong poles with no spreaders and have no problem pulling spreader bars for Tuna.I am using Perko wishbones that were left with my Marlin and the poles fits the tube precisely.They don't look as sexy as spreader's but definately work.Also,Perko makes a...

Guys, I found my back deck to be springy.The underside of the hatch was beginning to delaminate.So I added a piece of 1/4 x 2" aluminum angle under the vertical hatch,which allowed me to tap threads and tighten the hatch sufficiently. The whole set up is horrible.I just finished reinstalling...

Check with Mike @ Metan Marine Restoration in Rockland.

Tashmoo, The Alutechnos belt has a socket which receives the butt.Also,the socket pivots on one axis.The Braid gear has a pin that receives the butt,What happened to me with one fish with the Braid set up was the rod slid side to side.While the movement wasn't much,it was enough to focus on...

I fish 80's stand up.Got two fish around 68"( CFL ) and was glad to have the gear.First fish was fought with a Braid set up ( belt and harness).Needless to say,I bought Alutechnos gear after that.Get yourself an Alutechnos gimbal belt and bucket harness and you'll be good to 300 lbs.or more...

Mike, Have you run the boat yet ? I bought the same boat last Winter and had similiar reservations about running the boat without a thruster.I keep the boat in the Back River in Hingham slipped almost broadside to the Southwest wind,plus current.I can control the bow with the engines enough...

Hello, Try dealers such as Baert Marine in Danvers Ma. for stock on the shelf. Good Luck,Chris

Guys, Sorry for the misinformation,I should have been more specific!It is the entry way hatch from the deck to the cabin.There are two strips of closed cell weatherstripping between the two flat acrylic panels and this appears to be insufficient,unless the eisenglass is up. I'm just...

Hello, I have a2003 Marlin with the flat acrylic panel hatch.The weatherstripping tends to let water in during a decent rain or washing the boat down.Have any of you guys solved this problem? Unfortunately,I'm not a huge fan of full enclosures so the hatch is exposed most of the time...

http://www.3amarine.com/pre_owned_detail.asp?sid=08170587X5K3K2009J6I38I17JPMQ4397R0&veh=1147778 Sold !

Sold !

Artic, I found my boat on Yachtworld.But,Florida is the place to find deals.There is a repo yard in Ft.Lauderdale called National Liquidators.Transport from Ft.Lauderdale to Boston was 3100.00 so factor that in.

Hello, I recently purchased an 03 Marlin with 225 4 strokes with 420 hours for 54 thousand.The boat was a repo,so the boat wasn't well cared for in the past year.But,I still felt good about my deal.Search the web and you'll find these deals Good Luck !