Search results

any chance there is an ambient temp cut off? ie it will only heat if its below XX degrees outside/water temp? complete guess here

a rotted bang plate is almost a guarantee of water intrusion, and strongly supports the high moisture readings. to answer your question, yes, greenwood xl. as others have mentioned its pretty rot resistant, but getting wet can still lead to delamination. i think that the transoms remained...

are you having trouble getting the old one off, or the new one on?

so, full of fuel and 5400 rpm...what about full fuel, ice, gear, and a few guys? i always prefer an engine to be working easier than harder. a lower pitch prop would give you better hole shot and get your wot closer to 6k.

id call New Wire and ask them if its a paintable plastic. then paint it yourself. or see if a local car tint place can do a vinyl wrap on the front of it for you.

btw, i love the white

awesome, that should be a good combo. just wondering though, 5,400 rpm seems a pretty low for WOT unless you were really loaded down. shouldnt you be closer to 6k?

any final pics? also, im impressed it can cruise at 20kts. thats about where i start falling off plane with no tabs

glad you both got through relatively unscathed. sorry about your friends home, wspitler.

its my understanding that the transoms were reinforced when the ratings went up. the concern could be too much load on the transom with higher than rated hp. call grady and ask them. they have pretty good customer service

Anyone here getting impacted by it? if so, how are you doing? hope everyone is safe.

does the can have another sticker on it? if so, take it off and see if it floats in a cup of fuel (make sure to poke it under and swirl it). if it floats, as much as id hate to, i would probably just leave it. if it sinks, i might look into trying to fish it out so it doesnt block a pick up tube.

so, just out of curiosity, what it this thread used for? is the expectation that someone will search through 22 pages to see what someones first name is? most of us have our boat info in our signatures and our username is on every post...

given that the marlins werent rated for 600, id doubt the sailfish was

making too much of it? some people actually enjoy understanding hull design

i can get on board with this. the rounded bottom could prevent slicing too deep which may limit shooting back out of the water because of going too deep in

why? you say that a round keel will cut through a wave better than a sharp keel and give a better ride? can you explain that?

my concern with the anti-ventilation plate mount would be bubbles. if that motor is running, it will be pushing bubbles through the exhaust and block your view. even if not running that motor, when trolling, you get a lot of turbulent swirling of water with bubbles right behind the boat i...

have you been on one? if not, i would suggest going on one as thats the only way you will know

are you trying to record what you see live? my gopro is older (i forget which model) and doesnt have a viewing screen on it, but it does connect to my phone and i can see live video through my phone. that being said, once i start recording, the live view is not available . you might not be...