Search results

  1. Ryhlick

    It is the model 4185, that is the one that swivels.

    It is the model 4185, that is the one that swivels.
  2. Ryhlick

    It does swivel and it is about 1 1/2” taller but is totally fine.

    It does swivel and it is about 1 1/2” taller but is totally fine.
  3. Ryhlick

    https://photos.app.goo.gl/PHE4boV7uXJNXgfE7 Here is a link to some photos of my install.

    https://photos.app.goo.gl/PHE4boV7uXJNXgfE7 Here is a link to some photos of my install.
  4. Ryhlick

    Upholstered armrests

    No, they are still on there.
  5. Ryhlick

    Upholstered armrests

    Yes, I took them off my 228.
  6. Ryhlick

    Help with thru hull transducer placement

    Here is a picture of where my transducer is placed it is about 7” up from the center of the hull and placed in front of the intake so it has clean flow going over it.
  7. Ryhlick

    Help with thru hull transducer placement

    I have a 228 and installed a 175hw and it reads most things at any speed. I will take pictures tomorrow of where I installed it and post them.
  8. Ryhlick

    I put a seaspension system in mine. I’ll be at the boat in a couple of days and get some...

    I put a seaspension system in mine. I’ll be at the boat in a couple of days and get some pictures for you. I went with the model, 4406.
  9. Ryhlick

    228 Seafarer upgrades questions. MFDs - 2 9s? 1 12" or 16"? Auto-deploy trolling motor and shaft length?

    I have a garmin 1242xvs in my console of my 228 and it is great. I had two 9” screens on another boat and it worked well, but I prefer the 12” screen much more.
  10. Ryhlick

    Carry an Extra Propeller ?

    I carry a spare prop and a extra nut that goes on in case I drop one. I've spun a prop way off shore and it was not fun.
  11. Ryhlick

    Best dealer for parts/prices remotely?

    Jacobsen Marine is a Grady White dealer in the Seattle area. I have ordered stuff from them and they have shipped it to me.
  12. Ryhlick

    Pulling the trigger on a pilot house on the 228

    Charlie does great work, I saw another 228 with a cabin on it he did. Would you mind letting us know the cost, I have entertained this idea for a few years. Thanks and I look forward to seeing the progress.
  13. Ryhlick

    Threads for 228 baitwell tube?

    What he said, except mine are on stainless rods and I own a 1999 seafarer 228.
  14. Ryhlick

    Rod holders

    I put Burnewiin mounts and rod holders on my Grady and could not be more pleased. Take a look, you will not be disappointed.
  15. Ryhlick

    Good evening, sorry for the late reply. It should be on the starboard side of the boat. Lift...

    Good evening, sorry for the late reply. It should be on the starboard side of the boat. Lift the back seat up and there should be a long steel rod attached to the valve. I think you push it down to close it. (Could be the other way.). That is where mine is. What year is your 228?
  16. Ryhlick

    Replacing seats for a 2008 Seafarer?

    Take a look at affordable boat cushions in Florida. I bought new bolsters from them for my 228 and they are great.
  17. Ryhlick

    Full cover needed for slipped 2021 228 seafarer

    I've purchased 2 different covers fro Empire covers and have been very happy. The 1200 denier is very sturdy and has lasted 4 seasons on the Oregon coast.
  18. Ryhlick

    cover for wet slipped 228?

    I have bought a few from Empire covers, and they work great. They are reasonably priced and easy to put on and get off.
  19. Ryhlick

    Yamaha Factory techs we’re wrong.

    Nobody better than Shane of H&M Marine. He has helped me with a few things on my engine via face time and I'm in Oregon. Great shop and great staff.
  20. Ryhlick

    Crab pot puller

    Check out the one that fits in the burnewiin system, it works great. I don't own one but have used one several times and it is fantastic.