Search results

and 265 scuppers sit low. When tanks are full of 250 gallons the scuppers are under. There is a lot of height to the deck so it doesn't flood the deck. But if the hose fails you are taking on water. I know a lot of people here panic over scuppers under the water line. But it really isn't any...

I wouldn't try it until 3/4 tank at least.. Depending on how the boat sits the fuel surface may rest at an angle to the top of the tank. so you need to burn 35 gallons...

that don't sound right. Lee wishbone jrs are the same base on both sides. poles are interchangeable. Yo can pull a pin to rotate them down to the transom to get under bridges I understand the OP question.. He wants to put telescoping poles in 2" Lee Wishbone bases. Most telescoping poles...

Me too

It’s got bottom paint It’s 9’7” wide It’s in NJ

carrying fenders is a waste of fishing tackle space....

That should work. I have a big fender hanging on the center of the dock(up out of the water). I have a roller fender at the tip of the dock. I hang one on the stern cleat of the boat when I tie up I don't have a full picture of it. My floating dock has an outside fixed pole and I use a line...

twin 300s I would say two Your motors are new? Original were 225 or 250? maybe you only had single cylider and the helm that goes with it. I think you need a different volume helm to push two. I'm no expert...

if you use your phone on this site you have a choice to change the size of the image from "Actual" to Large or medium if there is a number on the sender it might indicate the length. WEMA is now called KUS.They have a website. They also sell on Amazon. They make the "magnetic" type vs the...

I'm pretty sure there is core in that. you can see the relief around the pie holes. I'm pretty sure grady only used plywood in decks and deck hatches. Balsa was in hardtops and hull sides of larger models.

OK. You cut the pink wire at the tank and touched to tank. Unless there was a bad connection to the sender at the tank, its the sender.

definitely a 265. Don't recognize the boat or the guys onboard. Its not a trailer boat..he didn't forget the plug. lots of things could flood a boat. The original scupper hoses were scary on mine. There are four 6" popout pie holes in the motorwell. The livewell thruhull & pump can leak..or...

unless by "pink to ground" you mean touch the tank.....It could still be the ground of the tank is bad add where do you mean pink wire...at tank or from switch or from gauge?

The only way to know if your boat has a power steering assist pump is to look for it. It should be in the stern "lazarette" just follow the hoses from the motors. Sometimes power assist pumps are connected directly to the AP pump. You have twins. Do you have one or two cylinders?. If you...

You have to look at the top of it. If you have original tanks it is probably the standard 5 screw pattern. My replaced tanks are threaded and screw in. There are no screws. Most likely you have a broken wire or corroded connection. check them at the tanks and at the switch. Check the...

Those mounds are on Shark River Reef. Look it up on NJ DEP site. All of the rockpile and wreck positions are listed. https://njdep.maps.arcgis.com/apps/webappviewer/index.html?id=01e06ca960a3414381fc69b797a52901 https://dep.nj.gov/njfw/wp-content/uploads/njfw/Shark-River-Reef.pdf We did well...

hahaha

My opinion of fins is that none of the Motor manufacturers have fins on their motors and they don't offer them.

Most of it is the existing 2 awg wire between the OEM switches. I think a bought a couple premade jumpers and I did make some new to reach the gunnel switches. I have a really good electicians crimper. Also, the new zuke motor cables were long and reached the new switches. The feed to the...