Search results

The Express comes with a Kenyon. There made in Connecticut. Dont know what size would be on the express, I would love to add one also, Keep me posted if you do it. https://www.cookwithkenyon.com/customize-grill/

I have flip it over and put it on the hardtop Mine is 11'

I upgraded mine to the one with the stainless insert. Taco is the supplier for Grady. But they will not sell it to you in blue only black. The blue one has to come from Grady. I think I spent $1500 for the kit. It will come pre-molded to fit the transom and up the sides. Which are not going to...

Looks Great I installed one also Your going to love it. Its like cheating.

I have an 01 330, I added a sender and gauge to my boat. I used KUS. This is what Grady uses now. I have it powered from the fresh water breaker. Put gauge in the head like Grady does. There is a link below for the sender. Their web site also has a trouble shooting page. You can access the gauge...

I did replace all the thru hulls with new stainless ones. Thats not easy to do, we made special sockets. Of course all new hoses to the thru hulls. The color is a Grady color. I wanted the boat to look stock. The factory actually sent me a cut out from a thru hull, Then we matched it to an Awl...

2001 330 I believe it's called Celestial Blue by Grady, We used Awlcraft light blue.

Mine leaked also, I have an Express, My Grady dealer had it in stock, It was not the knob but the valve was leaking.

Hello, Everything looks great, But the strainer looks to be installed up side down, How are you going to service the strainer and clean the basket. The small black plastic screw is a drain. It should be on the bottom. attachment.php

I added one to my 2001 330. we unsrewed the panel in the v-birth and removed the divider and panel below that. The thruster is located in that area. I put a group 31 battery in the storage area in the very front of the V-birth, where the panel just lift out. All my electrical components are in...

I have a 01 330, My hatch was completely water logged. I dug out all the wet wood, replaced it with composite, reglassed it. I don't fish, did not caulk it. I put short stainless screws so it looks mounted. I like taking it out when ever I need to go in the bilge. The water in the bilge doesn't...

I installed a Diamond Audio Micro 5 channel amp (1100 watts) sound great and not big. I mounted it behind the TV, wanted it to get air, because they do get hot.

I have only a few pics, I removed the cracked brass tubes and did the drain holes in solid glass, I installed the new brass tubes anyway so it looks original. Ripping out the wet plywood was the worst job I ever did. I used an electric chain saw to dig out the wet wood from behind the outer...

I'm in Connecticut and always close to full for winter, It reduces the chance of condensation. I treat both tanks with stabilizer and have never had an issue. Should also make out as far as price goes. Think it will be higher next year.

I just edit the post

If anyone can use these, just make an offer Pedestal is 24" tall, Diameter is 2 7/8, Has 6 Holes, 9.25" base Wheels Diameter is 15.5", fits 3/4 Shaft

Nice job, looks great

I bought Power tech OFS4 15.25x15 pitch 4 blade props. They are on Yamaha 300s which are on my 2001 3300 Express, no tower, boat is bottom painted, boat is full of fuel and water. I can tell you this, we went out for a ride, 11 people, 4200rpms and we were at 32 mph It felt like it had so much...

https://www.wholesalemarine.com/garelick-telescoping-stainless-steel-sport-diver-ladder/ I bought a 4 step ladder from Garelick. It collapses and I put it in the aft fish box. It wasn't cheap, but a good quality product. The link show a 3 step but the model # is a 4 step. I went with a 4 step...

I think you can buy all the electrical components separately, mine actually had a hole in it. Took it apart and the tank looks like an alluminum basket ball. Took it to a local welder shop and he put a patch on it. Still going.