Search results

I bought Power tech OFS4 15.25x15 pitch 4 blade props last June. They are on Yamaha 300s which are on my 2001 3300 Express boat is bottom painted, boat is full of fuel and water. I can tell you this, we went out for a ride, 11 people, 4200rpms and we were at 32 mph It felt like it had so much...

I took the advice and replaced the thermostat and breaker also. When I removed both parts from the water heater I noticed they were both bedded in a white paste. Being a auto mechanic I knew what it was. Its a heat transfer paste. We use it to transfer heat away from electrical components to a...

I have a 01 330, Im in the middle of this right now. I mounted a hose connection on the transom. Everything is inside the boat. I used a Tee to feed both motors, used 3/4 hose for flow, stepped down to 3/8 to fit in the rigging hose. I put check valves in so when the engines are running water...

Here is my 330 during the construction phase

Thank You I really Appreciate it

Hello usmm any chance of seeing the pics of your install thank you

I would really appreciate a picture or two Thank you

Where did you install the SCX20. I'm in the process right now. I planned on putting it on the hard top to the port side of the radar strut. I called Furuno to see if the radar would be an issue, they did not recommend having it under the radar beam. Said it could loose satellites due to the...

Drbatts that may have been me with the Marlin, I designed this and had it fabricated, all anodized aluminum and fully removable. Worked great but cost a fortune. As for getting the dink on the hard top, 2 can do it, 3 makes it easy, i put towels under the areas that might chaff and tie it down...

I have an 2001 330. I take the motor off and store in the cockpit. I have an 11ft aluminum bottom dink that we put upside down on the hard top. Tricky but once its up there you don't even know it. We went to block Island with it, 60 mile ride. No issues. I have bottom paint on the dink, so...

I can look at mine tomorrow and get the size, I don't remember the size off hand. West marine sells it by the foot, I probably went thru 50 feet easy doing 2 tanks and 2 engines.

Here are some pics of my set up This is how I bought the Boat The small switch combines Battery 1 (Engine Battery) with Battery 3 (House Battery) Hope this helps

Every thing is in the stock location, I dont know when or who put the combiner switch. Its in the cabinet with the others and the fuel valves. I will get a picture Saturday. I will take a pic of the back of the switches also. The panel is out right not because I had the batteries out for the...

I agree, we used Coosa also, just did the hatch to the bilge, wood was wet, now all composite

Here's some pics

My 330 is an 01, My deck was soft, caulk was terrible so I removed it to recore the deck panel. After opening up I was shocked at all the dirt and mildew plus some corrosion. Pumped the tank dry and removed it. It really wasn't that bad. I took it to my shop and pressured washed it with hot...

I have a 01 330, I have 2 batteries for the outboards. 2 Guest switches, one for each motor, I can pick battery 1 or 2 or both to start the boat. The 3rd guest switch is just on or off and thats for the 2 house batteries. I also have a 3rd switch, that combines the batteries, it has a removable...

I have a 330 and relaced all the Bronze/Chrome ones except 2. I used Gem Lux. Very high quality.

When I purchased my 01 330 there was a older Simrad compass in the small closet between the head and aft cabin. I removed the Auto pilot system and sold it. This year theres a new one. Installing it right now. Purchased Furuno 711c O/B. I did not get the heading sensor that came in the kit. I...

I had 2 Ocean LEDS under the boat, looked great, until one lost the hole LED part, fell off. I went for my lungs and bought 6 Lumitec Seablaze X2. 2 are going under the boat to replace the old lights and 4 on the transom. I had Lumitec on my Marlin and they were great. Expensive but worth it...