Search results

I have a 01, remove the battery switch box, it should just lay down. its under the batteries, if you need to remove the batteries its easier with the switch box out If i remember correctly there is a space where u can see the blower, i replaced all the hoses on mine, there was nothing left

Lucky 13, I repowered my 2001with Yamaha 300's also, Im curious because i have not had a chance to run it yet. What props did you go with? I was going to go with 4 blades but cant figure out what pitch to use

This Is the Best Presta 3kg Ultra Cutting Creme This is a one step compound, you will need a buffer that will go as high as 2200 rpms. You do a small area at a time increasing the speed until about 1800rpms. The heat will start to disapate the compound. Keep buffing until the glass is shiny and...

Just changed mine in the galley and head, will do the one out in the cockpit next. I found that Grady uses Scandvik on the new boats and thats what I went with. 2001 330 Express

I was wondering that myself, i like upgrading my boat to whats on the new ones but i cant see how to get a hose there.

I have a 2001 330 Express and did the same job, here is what I did. Dont know if its that much shorter. I removed the circuit panel and let it hang down, inside that area, in the bottom right corner ( towards the stairs) I drilled a hole. There is a trim piece that goes left to right above the...

I have an 01 helm area, starbord side between the seats middle one flips up and there is a square panel with phillips screws Should be right there

bow pulpit I have a 98 208 and just installed the pulpit. Grady provided no instructions for me. I'm a mechanic and it wasn't hard just time consuming. I have some tips. First remove the hardware that is in the way(cleat and chocks). With the boat on the trailer I put a 6' ladder in front of...

FSC60 Frank 2001 Express 330 2019 Yamaha 300hp x2

I have a 330 Express Took mine out, the padding is slid down over metal clips, some cusions have screws hidden under the pads, some dont. Just try lifting them straight up. hope that helps

Heres what I did Came out great Then I Bought an Express Still have the brackets

I have a 01 330, those areas are caulked by the factory, That obviously has been redone and not very well. Just recored my transom. The caulk is all cracked and needs to be redone, mine was leaking from the top aluminum cap and the brass drain tubes, look close at them. They crack and rot, I cut...

I own a 2001 330 Express and Im in the process right now. After a lot of research I purchased a complete rub rail from my local Grady dealer. The new rub rail is wider and has the stainless strip that goes on the outside. This is what they use on the new boats. You can only get the blue rub rail...

https://www.ebay.com/itm/GRADY-WHITE-OEM-273-CHASE-HULL-NAME-DECAL-10-735/192179791212?hash=item2cbecee56c:g:hWcAAOSwKytZDkbL Getting Close 273

In the process of replacing stripes and decals on my 33 express. Ordered the most up to date stripe kit from the GW dealer. Got the large raised GRADY WHITE for the stern sides, also went with the Serbia guy on Ebay for matching registration Numbers, came from Serbia in 4 days, highly recommend...

Hello, Just read your post, Im a Branford guy, we are at Branford Yacht Club. Our first Grady was a 208 also. Now on my 3rd GW. Mattituck is great, Stongs Water Club has come along way, beautiful grounds, nice pool, great restaurant. We have made that trip in the 208. This is how you learn the...

I installed a Lewmar 185TT 4.0 in my 1998 Marlin. Had the hole drilled by New England Bow Thruster, My friend is a fiberglass guy and Im a mechanic, I did all the wiring, installed the Battery right next to it and ran lighter cables back for charging. It fit great and worked like a charm. When...

I have a 98 Marlin and installed the same lights. Mine are located outside the motors. The only thing you need to be sure of is that the center hole for the wire misses any ribs on the inside, you can check by removing the access covers and climbing down in the bilge. Make a templet and remove...

fsc60 Frank 1998 300 Marlin 1998 Yamaha 250 OX66 twins

fsc60 Frank 1998 Grady White Marlin Twin 1998 Yamaha 250