Search results

Grey, I have had rusting issues with the tt motor on my Yamah T8. After removing twice cleaning sanding and repainting (fairly thick housing so you get a few rust coatings before perforation) I wrapped the motor in a RV product tape, Eternabond Appears to have put a stop to the ongoing...

Steve, it is not really a big event to remove the outboard, if you can find an overhead lifting point. An inexpensive chain hoist (under $100). I have removed the F200 on my 208 3 times. Remove clean up and replace the transom cap, and twice to play with the out board height when experimenting...

KY, what a great fit. Is the pod and swim grid custom or a Grady design on that year. You do keep a tidy yacht!

Before I quickly sell my T8 :D what would be the push power difference between the 15 hp Susuki and the high thrust 8-9hp Yamaha? I guess it relates to hull speed before planing. My T 8 pushes my 208 about 5-6 mph wide open, which is used very rarely. Since we have auto pilot and iTroll we...

For sure, next time around it would be a Susuki although no complaints about the T8's I have had over the last 20 years.

Nicely done Joe, Yes I have the same set up as I think you know, but on a fixed kicker bracket and on the starboard side. Moved both my batteries to the port for balance . Also enjoy the steering and navigation ease that comes with an AP.

OOOOps forgot to wish the gang a Merry Christmas,......but I certainly do wish you all a great NEW YEAR, boatin flotin and finding the fishies. Be safe and keep searching for more fun and happiness.

I replaced my o rings from home depot, took the plate in and found a match to fit. I also remove my plates to dry (stern and mid deck) out the fuel tank areas . It helps with venting the fuel fumes that seem to somehow escape a little with the plastic tanks while resting comfortably in her...

What a bout a new 218? Do not think there are many used 218 on the market. I would love to see one close up, as in a new owners photos. They always appear better with ownership than on the Grady site. I really enjoy my 208 with all the mods .....but a 218 would be on the special side of life...

Lucky, is the Suzuki much quieter than the Yamaha T8 or T9? Have only had Yamaha kickers over the past 20 years.

I have a F8 high thrust on my 208 with 25" leg. It is on a fixed kicker bracket. Clears the water when up and gets a good bite just below the transom on running.

Auto pilot is great!! My wife loves it for trolling. She can hit the AP leave the helm and net the fish when I bring it in. No wandering into someones tack lane, holds speed and direction to keep a tight line. Also have the iTroll which can control the kicker speed from anywhere in the 208...

I replaced the seals on my previous seastar steering (seaswirl striper. Not difficult as long as there is not metal seizer involved. Have had the seastar steering on my Grady for over 10 years with no issues. Whether exposure to the elements has something to do with it, apart from use, I don't...

Your kicker steering looks good. I was able to go with a straight rod from main to kicker with a small bungie from rod to splash well to keep it rattle free (quiet) while slow trolling. I have the F200 i4 and am running a 4 blade 141/2 x 15 SCE 4 Powertech. Wot 5700-5800 aprox. Better cruising...

You can also make your own. I made one from ready rod with threaded on ends purchased at a marine store. Ties the two motors together for steering. I have rigged mine to stay on with either outboard up or down. Just measure the rod carefully before cutting so you get full turns from main ti...

Just had a friend install Webasto heater in his boat and it certainly does the job of keeping the cabin and surrounding area warm. May I suggest you stay away from the Chinese heaters. Many have not been proven, and you only get one chance, as a boat fire can be disastrous . One spends a lot of...

Having redone mine a few yers ago myself, if found it to be not a difficult process, once you raise the outboard off the transom. Did that with a chain hoist . I went with stainless angle to replace the aluminium. It is what is underneath the cap that can be concerning. Check for delimitation...

Must have been some very stressful hours, so good to hear there was no injuries and you all came out it safely!

Welcome Henry, you have arrived at the centre of the Grady universe, with the best bunch of knowledgable guys that are always willing to help, and with lots of experience to share. Enjoy!

Check out Flynns Cove out by the Nuchatlitz Islands. Very reasonable cabin rentals, great folk that own and operate it. Boat access only, but great fishing kayaking and some very cool small sandy beaches for swimming, just minutes away from the cabins. It is bring your own boat and guide...