JJF
Well-Known Member
- Joined
- Feb 14, 2021
- Messages
- 453
- Reaction score
- 136
- Points
- 43
- Location
- Gloucester, MA
- Model
- Canyon 306
Launched on 5/10
Put my RADAR mast, RADAR/FLIR, all around white light back on the boat. VHF too, because it needs to come out to get the mast off. The whole setup has to come off for over the hwy travel to the storage facility.
Detailed the boat inside and out.
Touched up a few gel coat chips
Put all of the gear on board and got things organized
Tightened up the on-board flush fixtures.
Next up: replace a slam latch and a few cup holder drains (those little white GEMLUX fittings that break)
Put my RADAR mast, RADAR/FLIR, all around white light back on the boat. VHF too, because it needs to come out to get the mast off. The whole setup has to come off for over the hwy travel to the storage facility.
Detailed the boat inside and out.
Touched up a few gel coat chips
Put all of the gear on board and got things organized
Tightened up the on-board flush fixtures.
Next up: replace a slam latch and a few cup holder drains (those little white GEMLUX fittings that break)