Search results

I don't have a photo handy but as I recall there's no reason why you couldn't mount flat on the wall or nearly so. I just didn't want the 2-4 extra screws going through the cabin wall to the head compartment when I was mocking it up, but use finishing washers on the inside and I'm sure it would...

My 2002 doesn't have the emergency stop, I instead have a high-amp contactor (relay) which is turned on/off via a switch at the dash. Just getting clarification - on your 2006, the wiring goes directly from battery, to fuse, to emergency stop button? So the main power wire to the front is...

Grady33, this was pretty easy. I wasn't sure I'd like the way everything fit, so to avoid putting new holes through the cabin wall, I took off the stainless grab bar and used those existing two holes to mount a scrap of starboard I had, so now I had a 1/2" thick piece of plastic on the wall I...

USMM, I see your concern here and I agree it is a tight fit. No, I don't have the exact grady measurement at the midpoint - from the image I've got, my best guess extrapolation is that at the midpoint (15.6" from the bottom) the new grady unit is 12.9 inches across, it grows another 0.1-0.3 as...

Thanks USMM, that looks right to me. Still haven't been able to get the part # or a price from Grady. That 13" measurement though, what are you looking at as the limiting factor for that? Isn't that just the upholstered backrest? (which can certainly be trimmed)

the webasto water cooled units are interesting - they basically replace your AC intake through hull with a special thru-hull that’s also a heat exchanger. All of which makes sense considering the bilge is hot anyway with the generator etc. Plenty of room to add this in the bilge. Like I said...

Grady customer service came through! Based on these dimensions, I don't see any reason why this panel won't work for me. Going to try to get my local dealer to price it.

monoprice.com has a wide selection of mounts, swingarms, etc. Most LCD TVs will be primarily HDMI, but many still have RCA jacks (red/white/yellow) for video in/out. The antennas are fine; you won't get 100 miles but you'll get 10. I mounted a 32" Wifi smart TV on the outside of the head...

Having done a fair bit of night fishing with a boat with this same dome light installed - it really is nice to have the dome light with the switches on it. The left switch operates the dome, right operates the spreaders, and that's easily distinguished without taking one hand off the wheel or...

My one experience with my local dealer trying to get some parts help was less than satisfactory, and of course things a bit crazier these days. Do you happen to have a _grady_ part number for that, or at least a specific make/model/year where this light is available? A photo would be great, too!

I am equally curious about this, there are plenty of dome lights and touch lights but I have yet to see another one which also controls the spreaders. The model on lumitec's website doesn't talk about spreader control. To answer the original question - I have the same light on my pro-line and...

That'd be amazing. Ideally I need as much info as I can get on it, but I think measurement F is really the critical one for me. From the photos I have, I just can't tell if grady widened the space between the cabin door and the fold down seat. If they did, it was only an inch or two, but that...

Usmm, you’re certainly welcome to mine if the new one from grady will fit for me. If you’ve got any connections, let me know what you can find out!

I'm about a third of the way done, just trying to find a newer boat to do some measurements and verify their size of the vents. I would prefer to buy the whole revised cupholder panel with vent cutout from Grady, but need to double check the exact dimensions since it's different on all sides...

Hey Smoky unfortunately I'm new to yamaha, so I can only give you a half answer because I don't entirely understand the Yamaha bus. I recently switched my boat from Nmea 2000 to J1939. For me, I had one of the Yamaha 5 port hub units (6Y8-81920-01) up under the dash already. Originally the...

I'm in the process of retrofitting helm AC to my 2002 GW 330. I'm aware there were notable changes to the cockpit cap over the years. I'm trying to figure out, if this new cup holder / helm AC panel will fit my boat with minimal modifications. Anyone out there with a newer GW 330 who is...

I was wrestling with the captains chair on mine which is a 2002 disaster, and while I was doing some work in the cockpit I found it much easier to just remove the chair entirely. Frankly while plan A was to buy a fancy $2000 seat, plan B might be to just buy a small butt-sized leaning post...

I'm just in the middle (literally, I just mounted the plate 30 mins ago) of adding a cold plate to my drink cooler on my 2002 330 express. What do you need to know? I'm using a Webasto air cooled unit, bought from defender. They sell kits that are plate+compressor and have different sizes...

Through some digging I have found the Love controls TS2 temperature switch which appears to be a match. Now I see why this is mounted in the cabin as it is clearly not intended to be weatherproof (or even a marine part) - however, this would let me control the freezer box remotely without having...

I've just finished bending an webasto/istotherm freezer plate to install in the port under-seat cooler on my Grady 330. By the specs, it should easily be able to refrigerate that compartment, and possibly freeze the whole thing depending on how good the insulation really is. I went with an air...