Search results

Lee, Here’s what it looks like without the armrest. I only took one off initially to see how of a difference it makes. Huge.

Thanks guys. And will be careful with the plastics.

You can find the manuals on line. Also, don’t assume the battery is bad. Pull it and have it tested. Your wiring may not be correct either. Now is the time to go over the whole system. The SRM24 batteries are correct. You should have dual battery switch. Be sure NOT to run the boat on ALL...

I have the ladder back Pompanettes with the armrests. It makes the opening too narrow. I removed them today to give me room. They are a 360 swivel though.

Has anyone here ever used rain ex on their windshield? If so, how does it work ?

Seasick, speed with curtains on was 35. Rolled up curtains and 38.5. And yes... it is painted with anti fouling.

Kirk, no I don’t. I asked them to takes, but they did not

So my original thread seems to have disappeared. To start the spring I was running 5400 rpm and 38.5 with curtains up. So in the past few weeks I noticed my rpms were down. So I opened her up wot and only got 5000 max rpm and 31 mph. Mechanic suggested a bottom hull power wash and he thought I...

All fixed. Found a loose connection. Functioning properly now. Does NOT work while motor is off

So.... I’ve ruled out leaks in the system ( inside the boat) As it is a closed system. I’ve not ruled out leaks in the Rams, but the system appears to be full. I’ve not tested while the motor is running in the slip. You guys have been a big help so far.

Dennis, thanks good info. I was afraid to manually push down on tabs.

Thanks... I’ll take a look

I discovered that my trim tabs are not working. 1st questions ... are they electric or hydraulic? I can’t locate a reservoir. 2nd. Where the heck is the pump or solenoid located? I can clearly hear it, but can’t locate it. Can hear the motor run , but no action on the tabs.

In the range of $3500. S&S canvas in Lakewood or Gioia Sails in Lakewood. Both. Dry good. Gioia is a big operation

Legend, I’m going to go with your suggestion first of removing the rear center and then feeding in from there guys. This is such a great forum.

Glazierbaze, thanks for responding. No, I haven’t done anything. The end of the track is sooo tight and close to the frame that I didn’t want to try to jam it in. Hence the post asking for guidnace.

I’m in

So of I’d be interested. The folks at Comstock are great people. If someone has connections let’s see if they will back it

Today I went to the boat to put the curtains down after being rolled up for the summer. Well.... bad news, the rear curtain on the starboard side has partially pulled from the channel at the top where it meets the hard top. I tried putting the curtain back into the channel with no luck. It’s...