Search results

I had a leak around the aft cabin window. I took the outside ring off around window. Cleaned the silicone out and used 5200. I may regret it later but it fixed my leak. Mine is an 03 as well. So far no leaks up front.

The type and amount of Freon will be on a tag on the compressor. The year of manufacture will determine type of Freon .

It should have ports on it. You really need to hang gauges and check your pressures. I would make sure you have good water flow through the system first.

My wife is the seamstress. She made the same cover for our Marlin. I still have the blue sunbrella one she made for our last 330 express it’s dark blue and I wanted gray this time as I will be switching curtains over to white when I get them redone. I’ll post some pics when she gets done.she’s...

Need to find an upholstery shop or a seamstress.

That looks good. I just got my order from sailrite. My wife is making a cover from the back of hardtop to the transom. I’m gonna get some poles and try to rig up something for the rod holders to hold it up when we’re on the boat. I spent close to 200. For track 10 yards of material and thread .

Getting close. Got the cockpit and helm upholstery put back in. Still have a few more things to do but the list is getting shorter.

I’m looking for something a little taller without breaking the bank

I was looking at 36’s when I bought my 33. Everyone I talked to said don’t buy one with twins and I didn’t want a triple engine boat. That’s all I know I’ve never run one.

It’s been a busy week. I replaced the 4 batteries with new deka group 27’s. I installed isolators and got everything sorted out in the battery compartment. Installed a new battery charger finished the bottom paint around the motors and got all my miscellaneous screws sorted and everything out of...

Mayb this will help alittle.

You take a piece of the tape and wrap it around the stripe. You stick a razor blade in the piece wrapped around it at the width you want and have a helper pull the tape through and the blade slices it . I will try to post some pics demonstrating. I owned a collision repair facility fir 38...

I always use the 3-m stripe tape. I can’t remember the part number. Buy a big 2” roll of the blue and you can rip down the narrow out of it. The gold you can get the correct size. Any automotive paint supply store will carry it. Or you can get it online

It’s a 330 express. The compartment is port side rear battery compartment. It has a drop in plastic box also. Spot may have been used for oil fills for the 2 strokes in the early years not sure.

Finished

Brass barbs are completely sealed and will be flushed with freshwater after each use. The original flush attachments are disconnected so they can be hooked back up if someone so choses. Here’s a couple more pics .

Got all 4 batteries out. They are just turning 3 and all 4 were start batteries no deep cycle. Got 4 dekas coming in agm. Got the original charger out it still worked bu was only a 2 bank charger. I don’t know what it really mattered all the batteries were pretty much wired together any way . I...

Love the keys

Well this is the project I really didn’t want to do at this time. Mercury manual says AGM batteries. I was gonna just put 2 in and isolate the 2 banks but the wiring was horrible and all 4 batteries were group 24 start batteries. So I ripped em out and ordered 4 deka group 27’s. I’m gonna go...

Couple of pics for now