Search results

Plus labor, ouch.

For me, after spending 25k, I will do what the manual says and if I have an issue, Yami fix for free!

1st off, its not good for the alternator to see an open field, i.e. no battery to charge, so taking the cable off for long could actually short out what was a working alternator. To answer your question, yes, if you pull the B+ cable from the battery, without disconnecting the alternator cable...

I suggest you study the manual for your motor and pay special attention to the warnings. You will do damage to your motor if you run it with batteries off.

Aussie Grady Whites are American Grady Whites shipped to Australia. Nice dash though, custom I assume. https://www.boatsales.com.au/boats/details/2021-grady-white-seafarer-228/OAG-AD-13861804

Got to look at winds, if small craft advisory, I’ll be headed to SF Bay.

Going Sunday.

the holes to the right of the Lowrance MFD in the pic is an ideal place to run the power cable of the downrigigger. Mount socket in battery box behind and you have drilled 0 viewable holes and power cable is out of the way.

Try Search Tempest. See link below. Click “Open All” after opening link and you will have a few good options. Beware of scams. If it seems to good to be true, probably is. Grady White 208 Search All

Yes Lowrance Ethernet cable. Come in various lengths.

I sent this to Pacific Trailers this evening. Let’s see if they respond. Hello, I thought you might be interested in the conversation regarding your recent trailers being fitted for Grady White boats on the GW forum right now. Not good press. Perhaps you could reach out and offer...

Neoprene is a good material to use. No carbon in neoprene. I would make sure their were no voids or crevices between neoprene/5200 and tank. The idea is to make sure tank is off deck to allow air to circulate and assure aluminum is not ever sitting in water.

I’ve done the slide the boat on the bunks successfully many times. Never bent anything on my Pacific trailer. I’ll try to get pics of mine so we can see the difference. The issue may be with the fitting adjustment but could well be material too.

Either type should be get a bit of lube on the o-ring. I use frog lube but vasoline should be fine. Makes unscrewing easy.

I purchased 6” screw out plates in beige supplied by manufacturer below and am happy with results. I believe they are OEM manufacturer. Lots of venders to choose from. Deck plates

Contact Pacific Trailers at (888) 479-6920 and let them know the issue and send them picture. They are good people and I am sure they have a solution for the problem. good luck.

Ok, for now you will need a Lowrance Ethernet cable (orange ends) long enough to run from your NSE to the Sonarhub. Amazon has them.

The newer MFD’s (Simrad NSS and Lowrance HDS 3) have the Chirp and additional Ethernet ports built into them not requiring the Sonarhub or the like. However, once you start adding equipment to the network, there’s never enough Ethernet ports and you’ll need a hub of some kind. Simrad does use...

You need something like a sonar hub. This is what I run. It also has numerous Ethernet hookups. You can run both a chirp transducer and a structure scan transducer. Old picture. Cleaned up since. See Lowrance Sonar Hub. Also the R110 radar interface box.