Search results

I’ll take what’s left, if it is the trim right under the walkaround courtesy light that we are talking about. Is it that moldable?

Get a Standard Horizon with a ram mike, which has all the radio controls on the mike. You can even get wireless now. Mount the radio anywhere you want, out of the way and dry. https://www.thegpsstore.com/SearchResults.aspx?k=ram+mike

Are these products peel and stick, or apply the adhesive separately? I would think P&S would be a must for the DIYer, and might be easier to remove if more of the glue stays with the pad, and not the deck.

I wouldn't worry about not having a bow pulpit, I wish mine did not. I am required to dock bow in at my marina, and being one of the first slips next to the access ramp, I am forced to chose between leaving my anchor sticking halfway across the walkway for people to avoid, or leaving my engine...

Do your bookmarks have a 'search' box? Can't tell you what a relief that was when I found that little box. A key word or two, and a few hundred become 2 or 3.

efx, I hope you are going to replace that seacock hose while you're in there.

Thanks, I have that one on my list. I really want to avoid 'over the top', or find one cheap enough that I can try to modify it without much ri$k.

Wrxhoon, do you have a brand name, or model number for the cover? I am looking for something light weight for a Seafarer. Maybe it is also sold in the US.

Trailer damage is not seen right away, but when you see a trailer with a rusty line the length of the fender, where the drip line is, you know they are a user. It will also discolor some bottom paints and decals. Star Bright ez on ez off contains both hydrochloric and oxalic acids. Star Bright...

wrxhoon, I assume that you are buying the cover in Australia?

Do you prefer your downriggers off the side of the boat, where you can get to them easier, or off the back corner, where the lines are clear of the boat?

Don't forget the transom plug!!

Can you bluetooth from an iphone to more than one speaker at a time without going through some sort of radio/amp, etc?

Does Gemlux sell/loan you a tool for the large nut on the underside? Looks like a large basin wrench might work.

Like Seasick said, all wires should go through the plug. Any chance that it could be the pitot tube for the mechanical speed fron the lower unit pick up?

As to question #1, GW used standard rod holders, not heavy duty, so I doubt the 1 3/4" will fit.

Be careful sticking your hand in places you can't see. They leave a lot of sharp glass sticking out.

I believe that if I had known what a piss poor job Grady had done on the factory rod holders, I would have used those holes for my Gemlux, even if it was some work, and re-installed the factory rod holders in a proper cut out. GW should send you some free backing plates for that mess. I'll have...

I think the fuel hose went away after the second pic. Now he is just trying to seal the hole, and clean it up. My suggestion for a plug would come after the second pic, not as an alternative to his method of sealing the core.

Take a tapered rubber plug(Lowes, etc), drill it, split it, force it in the hole, much like your piece of fuel hose, and put a clam shell over it.