Search results

My 2 large panels down the center of the deck are starting to flex, especially near the inspection ports. I suspect the old plywood coring is breaking down. Anyone ever repaired these panels?

Take a Sharpie and make a line across the black hub and the stainless steel or Al on the propeller. Give it some full power hole shots, and see if they still line up. If not, the hub is slipping.

Edit to add: I posted after reading page 1, without realizing there were 2, which I don't have time to read at the moment, or seeing the date, so if irrelevant, please disregard. Ethanol gas can do all sorts of things to fuel lines and tanks. Including separation of the layers within your fuel...

If you think that is a PIA, wait until you have to replace the sea cock the pump is screwed into. A little tip that may save you that headache that I just went through, also a one-armed job through a small opening in the deck. Most sea cocks have a drain plug in them for cold climate storage...

Sounds like your main concern is when the top is in the boot, not open? You could install a slide track, or just another pair of gunnel mounts(deck hinges) like you have now, far enough ahead of the existing ones, so that you could either lay the top in front of the motors, or secure it to the...

In the process of replacing all my hasps, as several have seized or broken. '93 Tournament 22. Does anyone know what brand was used? I think they are the chrome plated zinc. I would switch to something else, but the originals lasted 20 years, and mainly I want the hole pattern to be the same. I...

If it is anything like my '93 Tournament 22, it is a function of poor design. The only bilge pump on my boat is in a small boxed in area just in front of the transom, and all the water getting into that box, and to the pump, has to flow through a 3/4 inch pvc pipe in a bulkhead. The pump...

Thanks, that is just about what I had in mind, but damn, it's hot out there. Taking it out of the water in a few minutes, having cataract surgery Monday, so it may have to wait a week or two.

New member, thanks in advance. New to me '93 Tournament 22 is not getting more than 38 mph at 4900 rpm WOT. 14.8 X 17 Solas aluminum prop, good compression, new plugs. Notched transom, no bracket. Lower unit seems buried pretty far. Just wondering where your Yamaha 200 two stroke is mounted...