Search results

hehehe... No its right. The bottom port goes to filter/separator. Left and right choose tank. Middle closes all ports.. Looks exactly like the OEM. Even says Anderson on the handle.

Got out solo on Sunday afternoon for some sea bass fishing on Shark River reef. Fish had been pounded by the party boats in the morning but I got a 10 fish limit by 5 pm. Turned out to be a beautiful day. Good shakedown. I got some projects....

the hole in the shackle bolt is for wiring it so it doesn't work its way out. Not that anybody does it :rolleyes: ...but thats what its for.... Oh...Now I see...you have a swivel...with the hex key bolt?.....yep...Locktite....

Looks right. Points to open side Hehehe I’m pretty sure 1/4npt is right.

Not so sure about 1/8" abs. I have 3/16 abs on my dashboard. I think 1/8 will be a bit flimsy once holes are cut.

That’s a good solution for the 330. You had that panel that came out to a door. On my 265 the switches were way in the back on the transom split on both sides. I would’ve had to rewire everything to move switches Give us a good write up. I don’t think anyone has posted that project yet

https://www.homedepot.com/p/1-2-in-x-48-in-x-8-ft-White-PVC-Trim-H120AWS6/205309788

Tabs fuse is pulled. Don’t miss them at all. 265 ride is great in crap. Spend your money on autopilot and bait

Launched on Tuesday. Friday opening day Black Sea Bass was blown out for us. We fished Manasquan river for fluke (summer flounder). Got 4 fish over 18" and a bunch of throwbacks. Burned one gallon of gas. Nice day inside the river not crowded until about 1 30 when Fish Monger charter...

the best bang for your buck is a 4' x 8' sheet of PVC trim panel ( Verdana or AZEK at Home Depot) Lighter than Starbpoard (HDPE) and a lot cheaper and in stock at Home depot or Lowes. No Shipping fees. The edges of PVC are not as nice as HPDE but you won't see any edges in that use. Cut it...

Plastic packing tape is your friend. Neither polyester nor epoxy stick to it. Cover areas that don't need work. You can make straight lines. You can use it as a dam.

you have to take the screens off the faucets and let the chunks flow out.... if you take the cabin drawer unit out and open the deck port over the tank, you can get light shining through tank and see how nasty it is. If it has a ring, do like I just did and cut it out. Put in a 12 gallon that...

hehehehe thats a lot of aggravattion for no benefit. just sayin'.....

Yes the cover can hold in the gas smell from the vent. Remove a pie hole from the deck at see if it smells in there

First you have to get a look at the back of the panel. All of the switches get power from one wire. It connects from one circuit breaker to the other. Are any breaker popped? Does anything else on the panel work? Nav lights. Cockpit the manual fwd bilge switch lights so there is power at...

I ordered 2 from Wholesale Marine last night. They have 1 left now. Go2 marine has them. Has to be th one with center pointing down

Google. MOELLER 033302-10. That’s the part number of the one that looks right. The one southern style ended up with.

The problem with the ones I got was they had ports out the front not down. Turning the handle did not open/close ports the same way as the OEM (it has ports pointing down). There was now way to use the new one without mounting it so that it could spin 360Deg. And the "pointer" would never...

Southernstyle said he found muellers that worked. The ones I got did not Here is a thread on that https://www.greatgrady.com/threads/fuel-tank-selector-valve-replacement.34763/ He posted a mueller part #.

I have a 265 also. I also bought mueller replacement to find out it will not work. They way it opens ports is different. In order to make it work you would have to mount differently and it would not make any sense with the pointer. I returned the valves and am still running the old ones. I...