Search results

There is no recalibration on that tach. Two wires connect to the sending unit.

www.enterprisetrucks.com

You can also get the domed ones that are a virtual match for the OEM ones on eBay...seller is Dago Fabrication. $189 USD and the color and font match perfectly. The only reason it's not an "exact" match is his sizing is about 1/2" off. If you buff out the ghosting before you apply the new...

Enterprise has a commercial division. They rent all sizes (1/2, 3/4 and 1 ton) and towing is OK. Biggest question may be if there is a Commercial division location in your city. Regular Enterprise - and all the “car rental” companies frown on towing. Another option is a local rental of a...

Does it start OK when you pull the manual choke lever? If so, then the solenoid that engages the choke might be the issue. I had a late 90s carb'ed 150 that had the same issue.

If the boat is only going to be towed 2-3X a year, consider renting a pickup from Enterprise's Commercial division. Unless you have a need to park another vehicle in your driveway.....

Can you put the bolt almost under the first or second link of the chain, and washer and nut it from underneath the pulpit?

A 7K trailer will have a net capacity of 5900-6000. It’s built with (2) 3500 lb axles. The trailer itself will weigh around 1000 lbs...maybe a bit less if they use 5.5” I-Beams. The 8600 lb capacity will have 5200 lb axles with 6 lug wheels. The trailer will weigh 15-1600 lbs. You will need...

Mines got a safety hook that connects to the chain to keep it from deploying if the windlass were to fail. Might be worth thinking about......

You are going to be above 7K and I’m guessing that boat goes on an 8600 capacity trailer. A max tow 1/2 ton will do it. Something like an F150 with a 3.5 EB.

Looks good....glad you got the right size trailer.

2018 F150 SCREW 5.0

It's readily available on Amazon.

You likely won’t find factory originals. Boat Outfitters makes custom ones that will do the trick. www.boatoutfitters.com

Tabman passed away. He was a good guy and always willing to help. Bennett Marine is now a division of Yamaha.

SEIs are fine, but follow their break in to the letter.

I made one out of 3/4” Starboard in the off white color. Works perfectly.

You will be fine on the gelcoat. Just take your cushions off. You can destroy them in a hurry. If you have bolsters be careful around them too.

eBay “Rusty-Ron’s” He is in Morehead City, NC. Buys a lot of overstock, irregs, etc. I’ve found GW cushions from him before, along with a few other things.

You can reach out to Ritchie and they will connect you with a nearby service center. For about $100 they will completely recondition it, including the lens. That said, I had mine out and ready to ship when I came across a brand new one on eBay for a few bucks more. I did have to buy a $16...