Search results

I suspect that the holding tank install will be more difficult than the toilet itself. There are some marine/RV toilets which are more similar to the ceramic style, but still have a self contained holding tank.

Grady usually runs their pump/float switch to the battery switch, not the battery itself. Look for a small brown, or brown with pink stripe, wire connected to the switch, and an fuse holder a few inches away.

Sounds like a missing spring, which holds the adjustment bar against the teeth of the slider. Is there any tension on the adjustment lever , when you move it in either direction does it spring back to the resting position? Does the seat stay in position if you hold the lever either forward or...

60/40 might be a thng.

Posted these links on one of Lucky's pilot house threads. https://www.a1-windscreens.co.uk/news/windscreen-wiper-movements/...

If it is fuel, or farts, it also smells like what it vents.

Spot lock? How many batteries?

Coil for each cylinder, black cylindrical piece that your spark plug wire comes out of. The black rectangular box on the back of the engine is the electronic control module. Is your Kill switch in position for that motor? That will kill the spark. I believe that you said this boat has been...

It looks like it would extend well beyond the transom, if folded down in that direction. More likely, it is secured to the rear of the hardtop in the closed position.

Depends on the ingredients. They are not all the same.

Before you remove a tie wrap from a bundle of wires, put a large one loosely around the bundle to keep everything together.

I seriously doubt that a 2024 freedom has a saltwater head. If it does, the sea cock should be obvious when the boat is on the trailer, located somewhere mid ships under the head area. Not to be confused with the discharge seacock, if you have overboard discharge

What is your end goal? I don’t know anyone who drinks out of those tanks. Do you also get green algae at the sink and at the freshwater wash down in the cockpit? That would indicate the tank. If it is only the backwash at the fill, it sounds like your fill hose is the problem. On my 2000 SF 228...

You should have matching zipper halves, on the forward edge of the curtain and the rear edge of the Bimini top. If you only have snaps, then it is a mooring cover which attaches to the top of the windshield.

Fittings are probably the same as any other shower hose.

Yes, need a better explanation of, “My anchor chain is getting stuck in the well“. On a previous tournament, I had two or 3 inches of threaded U-bolt sticking into the anchor locker from the bow eye, and sometimes the chain or rode would catch on it. I fixed that problem with a short piece of...

The windlass lifts the chain straight up out of the anchor locker, the weight of the anchor deploys the chain from the windlass to the water. Which side of the windless is your problem on? What is the weight of your anchor, sounds like you might be using a lightweight such as a Fortress. If...

IIRC , mine have acorn nuts. I don't know how you would cut the bolts, unless the stanchions are so loose that you can get a hacksaw blade underneath them. If so, I would make sure that every single one can be accessed before cutting one.

https://www.sailrite.com/Sailrite-Clear-Vinyl-Sample-Pack https://www.sailrite.com/Choosing-a-Clear-Vinyl-Window-Material-Video https://www.sailrite.com/Comparing-Osea-and-Strataglass-Vinyl https://www.sailrite.com/Choosing-a-Clear-Vinyl-Window-Material-Video...