Search results

McMasterCarr has it as 1.250” od x .032” wall thickness. I’ve included an adapter to use an air zip gun that uses the .401 shanks. It’s handy to preflare one side before cutting to the right length, just hold it with good gloves or leaned up against something soft.

PM Imjus, have them sent to you when he’s done.

Does the tube need to be heated and cooled? I have read somewhere annealing (heating and allowing tube to cool naturally) helps but quenching the tubing may make the end brittle. I didn’t heat the tubing on my installation but maybe because I used the tubing from McMaster Carr. I may have...

My ‘92 had those flat black rubber scuppers as OEM, I changed them out with same but eventually to the ping pong ball style. They are much better but I went one step further and matched up two rubber loose fitting plugs, attached a small paracord and anchored the loose end to the rod holder out...

When I did mine a few years ago I went a few steps further. Reading about the dreaded rotten GW transom syndrome I unbolted my 150hp Yammy, lifted up a few inches with a gantry crane, removed and resealed all hardware penetrating the transom, including kicker bracket and swim platform. It was...

Parts on the way. Forgot to mention in the PM I included some left over brass tubing I used (bought from McMasterCarr). You may find you’ll end up changing all the brass tubes once you see how easy it is to do. Good Luck

A few pics of my transome reseal

Ok, I’ll get them in the mail early this week....;)

Hey ImJustForYouToEnvy.........you want to use these tools or doing something else?

If you are still interested, I can send two sets of brass drain tools (1.00” and 1.25”) for you to use. I used them on my 19’ Grady. All I ask is to send them back in a reasonable time.

Funny, I used to work in the same building as B&B when they were in Hooksett.......25 yrs ago

X2.........Stonesplitter you must be right in my backyard;)

I trade a fishing pole for a gun in between seasons. Sept 30 ends our freshwater salmon and lake trout, Oct 1st is opening day for rabbit season till Mar 31st, Salmon Laker season starts Apr 1st. Six months of spoon dragging.......Six months of bunny chasing..... ;-)

My upgraded rod holders are covering 2 of the snaps, but you can see the hooks and snaps on the deck where it goes.

The Bimini has two hooks just under the front splash well, that cover snaps between the front splash well to the deck to protect the Bimini while in those hooks.

Cockpit (or mooring) cover

Fever.....here’s some pix of my original OEM GW Bimini/canvas before I had it redone last year. I know it’s a different boat but might be a pic of what you are looking for. It came with bimini, three clear windows and a back enclosure that zips up tight and snaps around the splash well. I...

1:15 will show the screw cover to remove

First thing you need to do is to pluck out the snap-in plastic trim piece that covers the screws (outside lower), remove front screws then the front panel pivots forward to disengage it from the sides. From there it’s pretty si(m)ple........

??.......inferior way to repair??