Search results

Subscribed.... That small hole gets eaten alive by striper scales....

There's a post on here or maybe on THT about it, do some searching.

I'm finally getting around to this on my do-do list on my 2003 330. When I bought the boat, the supply hose under the switch panel had been disconnected and capped, but I don't know why. Also found a T-connector behind the AC panel with one of the hoses disconnected - easy enough to...

There you go getting all practical and taking the easy path on me.....but I like it!!! Damn, sometimes it's hard to see the forrest through the trees. The easiest approach may be just cutting a hole above the panel and installing the 8247. I was trying to stay with the original design but...

Thanks, but the Blue Seas won't fit. I've been looking at these meters on Amazon and wonder if anyone thinks they would work: AC Side: Amazon DROK AC DC Side: Amazon DROK DC My thinking is to remove the PCB and somehow (MacGyver) attach these on the back side of the panel. The displays...

On the 330, going through the panel was no help due to the depth of the through-hull. IIRC, it helped with the deck side connection, but the only way for me to access the through hull was from the bilge. The Port side was actually easier for me, STBD was a PITA. I had the genny removed so...

SO TRUE!! I used a small ratchet wrench which was also effective. Just be ready to chase after it with a coat hanger after you drop whatever tool you're using a few times.

I did not, went with some high quality ribbed hose from West Marine. Can't recall what kind, but after the rust I found in those wire reinforced hoses, would never use again if I could avoid.

Great, thank you again!

Go for the 8" inspection port. It's easy to think that smaller looks better, but even after cutting a big hole, it's a REALLY tight fit to get an arm down there and you're working blind to get a hand on hose to muscle it onto the though-hull and then a wrench on the hose clamp. Both of my...

Willy-C, just wanted to make sure you got the tool back and confirm everything was ok?

Damn, wish I had known about the Moeller tubes, seems like they would have been easier. I used the McMaster Carr pipe on my 2003 330, Grady told me 1.25 inch x 3.5". I followed imjus4u2nv's advice and went to 3 5/8" for the length, custom cutting each one. I didn't know how to use Willy-C's...

Willy, I just got the tool yesterday and did the install today, looks great! Thank you very much for letting me borrow it. Can you please PM me a return shipping address?

Willy-C or imjus4u2nv, can you let me know what part # you ordered from McMcaster? I know the tubes on my 330 are 1-1/4 x 3-1/2 but i'm not sure about wall thickness. GW customer service gave me the name of the supplier, but their web site is dead. Thanks!

Message sent, thanks WIlly-C!

Thanks! Yes, I meant to say the AC Panel. GW must have updated the panel as mine is quite different, really just a PCB with the digital display. I'll check dimensions of the 8247 and the connections to see if maybe I can retrofit it...should have similar functionality.

Both of the digital displays on my 2003 330 are shot, they work but display garbage numbers. I've gotten numbers off the PCB's, but can't find a good replacement and Grady was no help. Anyone got an idea?

Hey Willy-C, I need to replace those tubes on my 330, would you be willing to let me use the tools after imjus4u2nv?

Did you look at a the V-Lock rod holders? I installed a removable 5 rod holder with 3 V-Lock's and just need to remember to take it off before I tilt the engines up. Got the rod holder from Palmetto Trooper on THT.

I have a 4 rod pompanette on my 2003 330 but it really sucks a lot of room from the cockpit. I've run without for the last 2 years and prefer the more open cockpit...but I do have the plate mounted on the deck that I'm not wild about. When it was on, I did use the rods for trolling. Been a...