Search results

my 2 cents. a thruster is a blessing on that hull. $$$$ for after build install (if you can get someone and the parts). genset $$$. cost me $3K to fix a panda with 60 hours on it. new outboards would cost, but you should have years on the 250's if they were serviced correctly. option 2...

also, some are polarity dependent. good luck, ron

as above if that works. if you need to adjust the sweep, ask GW what motor is in there and look up adjusting. had to do it on mine as the park was dead center of the helm sight line and the sweep was too narrow. running a small bead of caulk is not too difficult. good luck, ron

wow, just wow. i now feel privileged with the level of crap on my boat.

huh?? Grady shipped a boat without an engine and is relying on the dealer to install it later?? i guess their craftsmanship is getting worse than i thought.

https://www.lowes.com/pd/Oatey-3-5-in-L-Slotted-Round-Stainless-Steel-Strainer/50315033 i used something like this. but the 1.5 in ones and a lot cheaper in the old days (2 years ago?) good luck, ron

correct, shoot thru. can't speak to other. ron

can't answer directly. i have an in-hull mounted over the pocket in a Marlin. not experiencing any issues. god luck, ron

i was told by a Yam tech to start down then tilt. forces the water thru the powerhead first. ron

not for nothing, but the marina should have called you before they launched, unless they weren't going to charge you a haul out to fix the thruster if external issues were at play. ron

fyi, my '09 330 and '21 300 did/does not have a dedicated battery. if you look at your schematics it should show battery layout. good luck ron

fyi, the 330 hull was redesigned in MY 2008 to handle the F350's. good luck, ron

listed as options on your model. as said, check purchase agreement to see if you ordered them.

Hold my beer!

same

ice break up yet> :) ron

there is a process to follow regarding the map updates. can't remember, but look it up. fairly straight forward. the software should update from the sd without active captain input. i download directly from the garmin site to my pc then an sd, following the appropriate download instructions...

if the Garmin and CL7 are networked you will be able to see it on the Garmin device list (if you can see your engine info on the 1243, then they're networked) if not, you need to use a Garmin network cable from the 1243 to the CL7. you can then update (maps & software) via sd through the CL7...

can't help on removal (some have suggested various products but i haven't tried any). But, after wash down i wipe the windows with an Absorber. has prevented water spots so far. good luck, ron

IMTRA has a lot of options. good luck, ron