Search results

You may have done nothing wrong. The bait will die overnight if your harbor had a Red Tide (depleted oxygen) or a high water temp.

I'm in California so please enlighten me. What exactly is killing the whales from this program? Underwater blasting? If so, can't they deploy the gear without underwater blasting?

Perfect prop you have there. 4 blade 16 pitch...

IMHO - I think it's a really bad idea to put 900 horsepower on a 2002 330. Kinda like putting a 10,000 pound boat on a trailer rated at 5,000 pounds.

Yes, Yes and Yes. Seasick (above) said it right. And FWIW, I had a 228 for years and loved it. Until I bought a 265. Loved that one too. Loved the 265 until I bought a 330. Best boat ever for me. The common thread in my boat purchases: BEAM. Go wide and you'll always be smiling!

There is alot we know and alot we don't know. Hookup said it right: "The real lesson here is you need early warning that your hull is filling up with water before it reaches the tipping point." So, one thing is for certain, we should all have High Water Alarms in our bilges. That's my advice.

Thinking that cutting an inspection port behind the sink may be much easier? <<<< Negative. You need to go from the bottom up (in aft cabin ceiling). After you remove the ceiling panel, you can cut and insert an access port there if you want (for the next time!). Sometime after 2002, the GW...

My input to you: For #1 and #3, purchase a multi meter. Become familiar with how to test voltage on your circuits. As a boat Owner, you'll need to learn this anyway. Only then, can you diagnose what's wrong in your spreader light and FW Tank circuit. For example, if you are SURE you are...

Tap Plastics has the material you want + will sell you the all important jig saw blade to cut the material. I bought enough material to make two panels in case I screwed one up.

Looks great. I especially like the idea of installing it without the need to "open" the holding tank :)

Good luck with that...

would there be any issues with stainless hose clamps on the aluminum t-top frame? - eventually yes. Can make a nice rubber insulator from an old bike tire tube. If cut right, you won't even know it's there.

ProMariner makes a good 3 stage charger. I have been happy with mine. Be sure to get the wiring and fuse set-up right. Best to "over gauge" the wiring on any charger installation. If it specs for 12G, go with 10G.

Thanks to all for your remarks. About 5 years ago, I switched out my pop in access ports (6" Round) with the screw in kind. Sealed them with 4200. These screw in types are virtually water tight. I know this from doing the rear splash well area. What looks like water intrusion under my...

While I agree, there is no need to this now. That day will come I guess when I get any sort of leak. My main objective was to re-seal the 17 year old silicon caulk which I know was leaking a bit. I was pretty happy with what I saw after I lifted the panel.

My 330 Express is a model year 2006. Since the boat was built, the fuel tank deck plate has never been removed. So the other day, I lifted the deck plate off to do an inspection. While, I have rinsed the tank compartment with freshwater from time to time, I wanted to see if I had any issues...

Thank you Flot. That amazon link to the Attwood grill looks to be exactly what I need. I will go to the boat and measure it today. Appreciate you taking the time to help!

You have a brand new Yamaha F300. I would not hesitate to check with your Dealer on this. Take a video on your camera, record the hours, keep a simple log. The first 100 hours of run time are quite important and can be revealing. By all means, run the boat and get familiar but use the...

Check on that with your Dealer. Steam is not good (means water).

Any suggestions on locating the white plastic air vent, grill, at the stern corners of the 330 Express? One of mine is badly cracked and looking to replace it. It's the vent near the rear cleat just below the rub rail (roughly 3" X 24"). I had no luck locating one on e-bay or other quick...