Search results

We replaced our switches with the etched Contura switches. Looks great and was a direct replacement.

they're actually about the same weight.

yea....magical how that happens....those zukes are awesome! Fuel burn is a little better than our old Yammie 250s, but she is definitely faster both at cruise and WOT.

we have a track underneath the back of the roof. Another set of zippers on helm curtains separate from rear curtains and snaps all around. Custom made and is great in wind.

We just installed the sea dek on our 282. Love the helm and steps. Also installed in aft cabin as that is our storage area for all our gear.

https://marineproducts.net/rear-shade-poles-set-of-2-only/

We had the very same problem. It was a bad switch. We separated the spreader lights from the dome light. Put a standard toggle switch inside the top box for the spreader lights and bought a new standard LED dome light with both bright light and red light for at night. All good now.

we love the 7610 touch screens

We run a pair of Garmin 7610s with a through hull GT41 transducer for clear Vu and Side Vu scanning. Simrad AP 24 autopilot and Garmin xHD 18"radar. All is networked through a NEMA 2000 backbone. If we had to do it again, would probably add a Garmin autopilot for ease of use with displays, but...

We went with the fusion BB-100 and got rid of the head unit. Its all remote and we can actually run through our Garmin on the NMEA 2000 network. we put the fusion remote on our helm dash.

debated the props but decided to go with the 3 blade props. We have no slip, gets on plane very quickly, and flies. We have hit 53 mph WOT turning 6250 rpms. Seems to be a good setup, but I know others who went with the 4 blade props and are very happy. The boat definitely rides higher in the...

16 with 18.5 pitch

Love the new Zukes.....burning 1.8 at Cruise. Found we had to trim up quite a bit higher than our old Yammie 250s. Better burn and faster at cruise is what we gained.

looking good!

We looked at the Sureshade, but just had other issues. We would have to modify our rod holders on the top and the mounting location for the crank so it would not interfere with other installed equipment. Loved the idea, but in the end decided poles and shade could be put up in just a few minutes...

I am also replacing all my fixtures, Galley, Head and the freshwater nozzle on the transom....

We had a cover made locally, but bought the rod holder posts from Birdsall. Used the same track as our cockpit cover.

We just replaced ours...took less than 20 minutes. instructions are straight forward.

with a clean hull, new stripes look great. We just finished doing that task....You will be pleased with how it looks! Good Luck!

Enjoy!! I must say fixing it up and customizing to suit your needs makes it special.