Search results

I see that the OP has not posted on this thread since the original post. So.. Moving on:)

Not reconnecting the negative common batter cable is a common occurrence. With regard to your testing; You should never start your motor without water, never. Just a few seconds seconds could fry a dry impeller.

In addition to increases in everything, the demand for dockage jumped during the pandemic. So you have both inflationary increase and supply and demand factors. One Another item that may have significant impact is insurance costs, not the boat owner rates (which continue to increase due to the...

That's a good tip!

Yes it is breaks off, no steering but a crusty bracket does not explain "loss of ability to steer". I still need the OP to explain what he means

A non contact ( IR) thermometer can be had for $30 or so and is a very handy tool for those who do some of their own maintenance. You can get one at the box stores or Harbor freight. The more expensive models have some hand features and can be more accurate but really are necessary for basic...

How are you flushing the engine? re you using the flush port? Is the motor running? If the motor is not running does the telltake spit out a decent flow of water?

Since the OP stated that the fitting is very corroded, I take that to mean that he can see it. I don't think that without disassembly, he can see part 6. perhaps I am wrong. In any case disconnecting the steering arm and manually trying to rotate the motor should verify if the rod is binding...

I would think that heat is the bigger enemy in general assuming that the lines are blocked from sunlight in which case, UV rays are biggest factor. Although the original lines look good , I expect they are more brittle due to aging. In addition, often the hoses become more permeable meaning...

I think there may be a few issues. What does "Lost the ability to steer" mean? I agree that a picture will help a lot. If the motor will not move side to side or even wiggle a bit when you try to turn it by grasping the motor itself, that could mean that the steering knuckle on the mid section...

These days marine electronics become 'obsolete' quickly. At 15 years old, your unit may not be a good candidate for new map software. The processor speed, memory capacity and screen resolution may not be up to the requirements of new map software.

You can use a large piece plywood and a tarp but it is going to leak especially if snow piles on it and freezes/thaws/freezes.You coud use the original lids to make a plywood cover that fits the opening. That can be laid in place and sealed with tape. You would be surprised how well blue masking...

I find that the DampRid containers work really well but only if you replace them as they get used up. Do not pour the liquids down the sink since the chemicals in the product are fairly corrosive. I buy mine in one of the warehouse stores. The lavender scented ones are sickening to me. The...

The 258 is about 300 pounds heavier than the 232 but its beam is narrower. I would expect both configurations to perform similarly. Original reviews of the 258 with 150s were good with respect to performance

Ask my wife and she will tell you that a windlass is a must on any boat:) Honestly, is it necessary? Not if you don't anchor at sea:)

I also redid my bolsters a while back. They are looking a bit worn these days but were redone 12 years ago and sit all summer in the sun. I use Dryfast foam and no plastic wrapping. I used cheap brass grommets and they are still in good shape I don't remember how much material I used but I...

The plates can leak in several different ways. Obviously if the o-ring is shot , that can cause leakage but they can also leak if the mounting ring is not well sealed to the deck. I would question if leaky plates are responsible for a lot of bilge water. Remember that the fuel tank coffins are...

I think that the tanks can be replaced without having to remove any superstructure but I am not sure if anything has to be cut ( bulkheads) under the deck to replace the forward tank. That work if necessary will bump up the cost. I am not sure what the labor rates are in your area nor how much...

Does your fully loaded weight of 10,100 lbs. include the trailer?

Your towed load not counting the trailer will be about 7500 pounds with some gear, water and fuel. Add the trailer and in theory your towing capacity is OK. For example ramps that are in areas where the tidal swing is high will often have slimy and therefore slippery surfaces during lower...