Search results

Is this it? https://www.ebay.com/itm/GRADY-WHITE-OEM-FISH-BOX-DRAIN-ELBOW/303075310222?epid=789295293&hash=item4690b23a8e:g:X34AAOxy0x1TWCar

The rear drains on my 2000 Seafarer 228 are 2 piece, like the one in the OP. The scupper itself is straight, and threaded, just like a 1 1/2" thru-hull. The elbow is straight off the shelf in any plumbing department, a dark gray PVC el, with female threads on one side, and a 1 1/2 hose barb on...

That's one ugly weld in that last pic! Is it even tig welding?

Exactly, if right side up it would be winding over the top.

About a dollar per screw on ebay. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2060353.m570.l1313&_nkw=bimini+set+screws&_sacat=0

i thought the reason for having curtains was so that you could use your boat in the winter.

If you're on a trailer, spray with degreaser, let it sit, flush to bilge, and catch it under the transom drain. If you pull the tanks, there is a filter on the back, which many don't know is there until it stops up the flow of oil, at least on Yamaha tanks.

My framing is a little different, but I will end up doing something similar.

I just noticed the other day that my 2000 had the fuel and vent lines for the aux installed, and capped off under the deck. My '93 has an extra fill line run along side the original.

Sailrite is always a good starting point.

I also bought the Amarine clamp ons, because I was hoping that the flat plate would allow me to add one between each of the verticals on the factory rocket launcher. Unfortunately, there is only room on the ends, where the hardtop starts to curve away from the bar. Still experimenting with where...

Customer service at the factory will tell you in a minute. 252-752-2111

What kind pf mask are you using, doing all that grinding and sanding in your garage?

Comments and questions are active. Last reply was 2017.

Thanks. Remember that you must have the thru hull secured in the closed position inside the 3 mile limit.(USCG) A zip tie will suffice. If you know the answer, I would still like to know the model name or number.

I am going to add a foot rest to the helm chair, just like the passenger’s. I don’t believe it will be in the way standing up, as it does fold flat against the box that it will be mounted to. Unfortunately, the two that I was able to buy without paying $300 apiece are the ones with the 18°...

Don, please tell me the brand and model of that toilet. I have been meaning to ask if anyone had a china toilet on a Seafarer. I suspected yours was different. I think the pump you showed supplies water to the port side of the toilet for flushing, and there is another macerator pump somewhere on...

Don, thanks for the pic, but mine is the same design that Seasick linked in post #2. Large inlet on the end, and small discharge on the side. Do you have something other than the square Sanipotty?

Yeah, I'll probably see if I can 'sniff out' the problem this week-end. Haven't ordered a replacement, so unless I can get WM to price match, it won't get changed this week. Have to work on some comfort items. The steering knob always seems to be at the bottom of the wheel, which drives me...

That's a very small inlet for a macerator pump!