Search results

There are a number of posts on GG on the vent window. I did what Legend did. Tempered glass. Makes sense to order a few - have a spare and each piece is less.

Clean it, sand it with fine grit and spray with plastic compatible paint. Then throw it out! Have a starboard one made - it won't get UV damage and it won't rust. I use a guy in Cape May called Offshore Eddy who makes lots of starboard custom accessories. https://offshoreeddy.com/index.html

Hardtop mount. GemLux Deluxe outrigger bases. Any rigger you want that fits. Mine are 15' but you can go longer. https://www.greatgrady.com/threads/outrigger-poles-what-length.35891/#post-249552

The 1/2" PVC pipe connects the forward bilge to the aft bilge. Its fuel should leak from your tank it could be confined to the fuel compartment and/or drain into aft bilge. On my boat GW plugged it is plugged in aft compartment to prevent a fuel leak from getting into cabin and creating a...

This is water and fuel from my tank years ago. The fuel will be on top. You could see if it will burn but be careful. Not sure what the snots are but not fuel. You could pull the deck and wash the fuel tanks down to get smells out of there. Get bow up high and get water to drain from fuel...

I can't tell hold finds ow deep the water is but I would find a flat bottom scoop, collect some water in a jar and see what you get. Fuel will float. https://www.westmarine.com/plastimo-floating-poly-bailer-4503348.html I did tanks on my Islander last Summer. Where is the boat in CM?

Fuel will burn not explode. Throw a match in a container of fuel and it will burn - not explode. Throw that match in a partially full fuel tank and - kaboom! I handle raw fuel for my filters. I have changed sending units, pumped water out of bottom, pulled tanks, etc. Never comfortable working...

Don't use a dry gas additive! I use Sierra clear bowl filters.Run the boat and shake up the fuel in the tank. Drain filter before it gets too high. Repeat until you clean it up. If you drop the filter dump into container, pour gas back in and top off with clean fuel. Put filter back in. There...

I doubt Grady White installs Euro sending units. Probably USA. Look at the sending unit top. There may be information etched. You need the length and resistance. I'm alway concerned about explosion hazard when working on fuel tanks. I put dry ice in fuel fill and add more when I pull the...

Call GW Customer Service. With a newer boat like yours you stand a chance of finding them.

The sending units have magnetic reed switches and resistors inside them. As the float moves switches open and close to create a variable resistance as above. The CL5 or Yamaha fuel gauge "debounce" the sending unit and convert to a percentage reading (CL5) or 8-bars of fuel (Yamaha gauge). Your...

I looked around-no stock. Looks like Lewmar replace the GEN1 with a new joystick and converter module kit. I would call Lewmar USA 203-458-6200.

GW uses the Perko vented fuel fills - the vent is inside the fuel fill. It could be the tank is nearly full and the tank sending unit is bad. This is obvious but I'll say it anyway - burn off plenty of fuel before pulling the sending unit - or you will have fuel all over the place! You can...

Looks like 4 screws in the back hold it in. You could probably do it thru the Fusion or Yamaha computer hole if you can get them out. Also that joystick looks like it has been discontinued. Possibly find new old stock somewhere. There are new models too that should fit...

You are going to have to get behind that thruster at some point. Maybe take the Yamaha computer out. Any access from in the cabin?

I think it was this one. It’s only 12” or so high. Perko 1181DP0CHR Fold-Down Combination Masthead/White All-Round Light - Horizontal Mount, Silver More Like This Perko 1181DP0CHR Fold-Down Combination Masthead/White All-Round Light - Horizonta

Surveyor told me nowadays most boats "sink" in the owners driveway on their trailer! I own a self storage business that does boat storage. I see one a year like that.

I replaced mine two years ago when I refinished the hardtop. Shorter version same as had before. It's hard to reach up there but the nut is set tight enough I can raise and lower with one hand without have to adjust it.

Be careful prying the lens out. May have a small hole you can pull with a paper clip. No longer available so don’t break it! Electrical parts available from DigiKey. Search this forum for part numbers. Use DigiKey as search term.

Depending on the boat’s age the owners manuals on GW site can be a big help with wiring and fuse diagrams/location.