Search results

I could be way off but I think by even next year some of these boat prices will start to come down. You found this guy bailing after 6 months. It’s not a $35k boat without a reliable engine imo. some of these used prices are close to new prices 10 years later. Hell I’d rent the rest of this...

If you know someone with a decent sewing machine you could do it for a few hundred dollars of materials and the cost of a boat ride for their labor

I could be way off but maybe when running the engine kicks up debris in water spray? I wouldn’t make a huge project but probably could prime and paint the area periodically

Could try getting some rubber gasket with adhesive for some of the hatches if they don’t already have it. I think the seavee hull has a low point up towards the bow in the bilge due to hull design. If it persists you may want to try to chase it down to prevent persistent mildew and whatnot

I’d agree w 3M 4000UV because it allows a little flex and uv protection. Can countersink the drill holes. Also pre drill with smaller drill bits. Use a drill bit guide if you can to get the drill holes perfectly vertical. Use painters tape to contain the gooey mess. Use throw away gloves. Allow...

I didn’t mean to wake up on the wrong side of the bed either. Sorry seasick - obv I know you are a strong contributor to this site with a lot of knowledge to share. just seems like this guy is excited about the prospect of this boat, getting a survey, and it could very well serve to meet his...

frankly bud, I didn’t say anything misleading. I told him what my experience has been with a DIFFERENT hull. I made it clear it was a 2 stroke. I’ve had a great experience with that boat and it’s never been sluggish for me personally. I understand your point btwn 2 and 4 stroke as most boaters...

Varying opinions here too https://www.thehulltruth.com/boating-forum/64411-grady-white-209-escape.html Imo the GW dealer wouldn’t sell a 20’er with a 150 if it wasn’t adequate. If you’re concerned about it only having 150 you can hold out to find something with more juice but there is quite...

I think you’ll be fine with 150. Ive had a 20’ center console with a 150 evinrude 2stroke and it’s been a great boat. i think 200 would be more than needed. CCs are just a lot lighter than walk arounds like an overnighter. On my CC w 150 we didn’t often open up to WOT, not really a need.

Yes agree. I’d suggest 3M 4000UV because it allows a little flex and uv protection. Can countersink the drill holes. Also pre drill with smaller drill bits. Use a drill bit guide if you can to get the drill holes perfectly vertical. Use painters tape to contain the gooey mess. Use throw away...

Market sure is heated. Looks like the registration stickers are 2019

Not affiliated 2000 Grady White Fishing Boat https://sfbay.craigslist.org/nby/boa/d/napa-2000-grady-white-fishing-boat/7369672428.html

Seachoice makes scupper drain covers with ping pong balls to prevent back flow. I haven’t tried them personally. Worth making sure scuppers are good to go with double clamps each end and the hoses are still good...

Good luck and get back on the water soon

You can definitely find them, but like others said, the good ones go very quickly. Market is heated…in two years time you will have better luck tbh, but also try connecting with people at local marinas to put some word out. Some people will rather a smooth transaction than top dollar. also the...

If surveyors are not available, find a boat mechanic to check engines’ compression at a minimum. It’ll be worth the diligence to prevent major issues from becoming your problem in the future.

Marina should have some video of what happened? I’d move the boat but as others said pursue what you can from them. Approach them with a good attitude and not accusatory despite how tempting. Good luck Edit - check your insurance policy as well, you’d be out the deductible but they may honor a...

Not sure if this is a real posting. No affiliation 2001 Grady White 228 Seafarer Yamaha 250 4 stroke https://sfbay.craigslist.org/sby/boa/d/santa-clara-2001-grady-white-228/7363025196.html

Hope you are feeling better soon and back out on the water!

Check out the knucklehead in this vid https://www.instagram.com/p/CR7YIBkFkAe/?utm_medium=copy_link